View Thread
Before Posting, Please Read Our Posting Guidelines Below.

1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

 Print Thread
Console side door
modenacart
#1 Print Post
Posted on 01/27/11 - 1:24 PM
Member
Personal Page

Posts: 741
Comments: 4
Joined: 02/28/09

Are all the montauk console side doors the same size. I just bought a louvered side door and it doesn't fit. I have a 74 console.


They that give up essential liberty to obtain a little temporary safety deserve neither liberty or safety.
--Benjamin Franklin
 
Joe Kriz
#2 Print Post
Posted on 01/27/11 - 1:29 PM
User Avatar
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums

Posts: 11447
Comments: 452
Joined: 03/18/05

The louvered doors I believe are the same overall size.

However, your model console did not have louver doors.
The 1973 to 1976 console had solid doors which apparently have a different size opening.
http://www.whalercentral.com/articles...icle_id=58

 
Finnegan
#3 Print Post
Posted on 01/27/11 - 3:32 PM
Member

Posts: 1926
Comments: 16
Joined: 05/02/08

Owning Whalers with both style consoles, I can confirm what Joe has said. The "winged" console that you have is a different size and different construction than the lovered door assembly, which began in 1978. A louvered door to fit that opening would have to be custom made, or a different size opening would have to be cut into the console.

You can see the earlier "winged" console style door here:

http://smg.photobucket.com/albums/v42...0006-1.jpg


Edited by Finnegan on 01/27/11 - 4:28 PM
 
modenacart
#4 Print Post
Posted on 01/27/11 - 7:29 PM
Member
Personal Page

Posts: 741
Comments: 4
Joined: 02/28/09

The front door fits just fine, its the side door that doesn't fit. I guess now I will have to decide if I want to cut the opening larger or make new doors.


They that give up essential liberty to obtain a little temporary safety deserve neither liberty or safety.
--Benjamin Franklin
 
modenacart
#5 Print Post
Posted on 01/27/11 - 7:31 PM
Member
Personal Page

Posts: 741
Comments: 4
Joined: 02/28/09

What is the model number of your compass Finnegan?


They that give up essential liberty to obtain a little temporary safety deserve neither liberty or safety.
--Benjamin Franklin
 
Finnegan
#6 Print Post
Posted on 01/27/11 - 9:27 PM
Member

Posts: 1926
Comments: 16
Joined: 05/02/08

The compass on my 19 Outrage is original optional equipment from the factory in late 1974, when the boat was manufactured, a Ritchie "Navigator 2000" series, recessed. This compass model is still widely available, but has been re-designed and modernized. It will still fit the raised circle on the console top. It's a first class piece of equipment, and costs about $225. For my money, the Ritchie Navigator series 2000 compasses are the best you can buy for a powerboat. It'sa big compass, and like Boston Whaler in the Dougherty days, I like big compasses.

On the 1978 and later consoles, it looks best as an SS Binnacle mount.

 
Gamalot
#7 Print Post
Posted on 01/28/11 - 5:55 AM
Member
Personal Page

Posts: 1086
Comments: 3
Joined: 06/21/10

Here is the 1974 door Josh. Let me know if you need a trace or just the measurements.

http://img.photobucket.com/albums/v72...0_0568.jpg

Gary


Edited by Joe Kriz on 03/15/11 - 6:21 PM
 
Gamalot
#8 Print Post
Posted on 01/28/11 - 6:05 AM
Member
Personal Page

Posts: 1086
Comments: 3
Joined: 06/21/10

Not to hijack the thread but I think we have this one answered.

Regarding the compass Fin. I have a similar Ritchie flush mount on mine, Model F60-D7 but it is foggy.

Does any one know if Ritchie will refurbish older compasses?

Gary

 
Tom W Clark
#9 Print Post
Posted on 01/28/11 - 7:45 AM
User Avatar
Member
Personal Page

Posts: 4280
Comments: 7
Joined: 09/30/05

Yes, Ritchie will refurbish an old compass.

http://www.ritchienavigation.com/serv...m/service/

The top-of-line compass used by Whaler in the 1970s and 1980s was the Ritchie FN-50, shown in their options and accessories catalogs.


 
Tom W Clark
#10 Print Post
Posted on 01/28/11 - 7:48 AM
User Avatar
Member
Personal Page

Posts: 4280
Comments: 7
Joined: 09/30/05

Were the console doors on the first generation Montauk/Outrage consoles made of Mahogany plywood or solid wood?

Is the fiberglass of the console exposed as a rough cut behind the door when opened?

Is there a rabbet cut in the edge of the door and the hinge mount?

 
Gamalot
#11 Print Post
Posted on 01/28/11 - 8:30 AM
Member
Personal Page

Posts: 1086
Comments: 3
Joined: 06/21/10

Here is the back side Tom and it is Mahogany. Just flat 3 ply plywood, no rabbet and the edges of the hatch fiberglass are exposed.

I cannot be sure yet but it does appear the ply faces are a different wood and possibly Teak on the front with Mahogany on the back. I'll know better when I do some sanding and begin the finish process. There is a part number on the hinge side of the wood FP0674 which makes some sense as my boat was delivered in July of 74.

It is 15.5 inches high and a total of 11 7/8" wide with the hinge strip that is 1 5/8".

http://img.photobucket.com/albums/v72...0_0572.jpg


Edited by Joe Kriz on 03/15/11 - 6:20 PM
 
modenacart
#12 Print Post
Posted on 01/28/11 - 9:24 AM
Member
Personal Page

Posts: 741
Comments: 4
Joined: 02/28/09

Which boat used the richie danforth constellation model compass?


They that give up essential liberty to obtain a little temporary safety deserve neither liberty or safety.
--Benjamin Franklin
 
Tom W Clark
#13 Print Post
Posted on 01/28/11 - 9:34 AM
User Avatar
Member
Personal Page

Posts: 4280
Comments: 7
Joined: 09/30/05

None. There is no such thing as a Ritchie Danforth Constellation model compass.

Danforth was a different manufacturer of compasses. They did make a model called Constellation.

Whaler only used Ritchie.

 
modenacart
#14 Print Post
Posted on 01/28/11 - 9:51 AM
Member
Personal Page

Posts: 741
Comments: 4
Joined: 02/28/09

That makes more since.


They that give up essential liberty to obtain a little temporary safety deserve neither liberty or safety.
--Benjamin Franklin
 
Finnegan
#15 Print Post
Posted on 01/28/11 - 10:26 AM
Member

Posts: 1926
Comments: 16
Joined: 05/02/08

Two comments:

Regarding the lower, larger, front of console louvered doors, the doors on the 1978-1982 consoles are larger size than those on the 1983 and later consoles. They are not interchangeable. But the side console louvered doors are.

I sent a Ritchie Navigator in for service, since some fluid had leaked out. Charge was $100, and the guy at Ritchie told me that, in effect, they were not going to repair my perfectly good compass, but instead give a new one. They did!

 
Joe Kriz
#16 Print Post
Posted on 01/28/11 - 10:48 AM
User Avatar
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums

Posts: 11447
Comments: 452
Joined: 03/18/05

Just for clarification,

The 2nd console for the Montauk started in 1977
1977 to 1982
http://www.whalercentral.com/articles...icle_id=58

You can also view the 2nd console in the personal page section for all the 1977 Montauks.

 
NauticalLumber
#17 Print Post
Posted on 01/28/11 - 7:24 PM
Member

Posts: 160
Comments: 1
Joined: 01/09/08

....If interested I can make a louvered door for your console. I would need the measurements of the fiberglass opening on your console.

Thanks,
Mike
Nautical Lumber Co

 
Gamalot
#18 Print Post
Posted on 02/11/11 - 12:23 PM
Member
Personal Page

Posts: 1086
Comments: 3
Joined: 06/21/10

I did some sanding today and as stated above I can confirm the front veneer on the side door is Teak while the rear side is Mahogany if any one cares.

http://img.photobucket.com/albums/v72...0_0573.jpg


Edited by Joe Kriz on 03/15/11 - 6:20 PM
 
modenacart
#19 Print Post
Posted on 02/11/11 - 1:19 PM
Member
Personal Page

Posts: 741
Comments: 4
Joined: 02/28/09

I guess it was cheaper to use mahogany for the rear?


They that give up essential liberty to obtain a little temporary safety deserve neither liberty or safety.
--Benjamin Franklin
 
Gamalot
#20 Print Post
Posted on 02/11/11 - 2:19 PM
Member
Personal Page

Posts: 1086
Comments: 3
Joined: 06/21/10

Could be Josh but what I did find interesting is that the door was varnished on the inside and oiled on the outside. It could just be they did the Teak face to keep it all looking the same as the rest of the wood on our boats. Another interesting thing I found was the strip of wood above the door, I'll call it a drip edge, is Mahogany and that too was varnished instead of oiled.

My boat came from the dealer with the fishing platform forward of the CC. It is attached and screwed down on to strips of wood fastened all around the sides, front and the front of the CC. They too were Mahogany and varnished and every piece of that wood was completely rotted from water and debris that collected in those joints. When I re-install the fishing platform the wood strips it will be to fastened it to will be UHMW poly plastic that will never rot.

So far there is not a piece of Teak on my boat that I can't clean up, re oil and re use and almost every piece of Mahogany has to be replaced because it rotted. HMMMM.

 
Jump to Forum:
Bookmark and Share
Today's Date & Time
November 23, 2024 - 5:50 PM
Visit our Sponsors
Carver Covers - The Best Covers Under The Sun


Wm. J. Mills and Co. - Boston Whaler Canvas


Specialty Marine - Parts and Accessories


Nauset Marine - Whaler Parts and Accessories



Click on logo to visit site
View all Sponsors Here
Users Online
Welcome
AuntiesMontauk
as the newest member

· Guests Online: 9
· Members Online: 0
· Total Members: 50,390
Login
Username

Password

Remember Me


Not a member yet?
Click here to register.

Forgotten your password?
Request a new one here.
Top 5 Models Posted
· Montauk 17 1,638
· Sport 13 1,366
· Outrage 18 556
· Nauset 16 402
· Sport 15 365

View all Models Here
Render time: 0.24 seconds Copyright WhalerCentral.com © 2003-2024 86,548,983 unique visits