1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Installing transducer on 1985 17" Montauk
lucky17	#1  Posted on 06/27/09 - 3:19 PM
Member Posts: 1 Comments: 0 Joined: 06/27/09	Can any one tell me what the angle of degree the transom in association with the bottom of the boat is? 12-14-? Edited by lucky17 on 06/28/09 - 6:25 AM
Guts	#2  Posted on 06/27/09 - 3:48 PM
Member Personal Page Posts: 612 Comments: 8 Joined: 11/21/08	Maybe this will help... http://whalercentral.com/forum/viewth...post_41053 Edited by Joe Kriz on 06/27/09 - 7:12 PM
wrangler	#3  Posted on 06/28/09 - 1:20 PM
Member Posts: 264 Comments: 0 Joined: 03/14/08	You can make an easy way to figure it out. 2 pieces of plywood 1-2" wide about 6-8" long. Stack on top of each other and drill a hole in one end of them. Connect them with a bolt and nut so they swivel looking lke a L shape. Place one on the bottom and the other one up tight against the transom. With a protractor measure this angle.
Whaler warrior	#4  Posted on 06/28/09 - 1:28 PM
Member Posts: 22 Comments: 0 Joined: 04/18/09	Or...you could just get one of those cheap angle finders & lay it against transom--easy..Rich