Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
I have a 1987 22' Revenge W/T. In the front V compartment the drain channel is a bit bent, thus the plugs don't fit well and water fills up the compartment. Anyone had any luck changing out the brass drain channel?
I changed mine out on my 18 Outrage which is probably similar to yours. Used a PVC unit that snapped together and it worked well. I have the tool to do the brass drains but it was to short for that front drain. I used a 1 1/8 diameter pvc drain tube that was 4 inches long I believe. The two sides lock together positively. I think SeaChoice or SeaDog made the part. I ended up doind all my drains with these and they worked well.
