1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

trailer setup/adjustment
sherry	#1  Posted on 05/13/09 - 2:32 AM
Member Posts: 5 Comments: 0 Joined: 08/18/07	how do you set up keel rollers on your trailer.the do the first one at the stern set even with the trailer frame then you proceed to raise them as you work your way forward to the bow. thanks everyone
mattgeiger	#2  Posted on 05/13/09 - 2:50 AM
Member Personal Page Posts: 310 Comments: 2 Joined: 02/22/07	I was just looking at the way mine are set up. Now would be a good time for me to adjust since I am replacing 2 bunks and adding 2 additional bunks. I have 4 keel rollers and they appear to be evenly raised just above the trailer crossmembers. Edited by mattgeiger on 05/13/09 - 2:51 AM Cape Dory 28 Hobie 20 Miracle A Class Catamaran
Phil T	#3  Posted on 05/13/09 - 4:17 AM
Administrator Personal Page Personal Album Project Albums Posts: 6994 Comments: 6 Joined: 03/26/05	Typically, the keel rollers are all set to the same height. This height will depend on which model you have and if the hull sits inside or on top of the fenders of the trailer. Once the rollers are set, the bunks are set to steady the boat. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
sherry	#4  Posted on 05/13/09 - 12:59 PM
Member Posts: 5 Comments: 0 Joined: 08/18/07	I have a1991 boston whaler ventura 16sl and it sit,s all most on top of the finders.thanks for the reply everyone.