1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

how much gel coat? and sakonnet window-glass?
digitalvet	#1  Posted on 05/01/09 - 10:42 AM
Member Personal Page Posts: 27 Comments: 3 Joined: 04/30/08	How much gel coat will I need from Spectrum to cover the inside and white outside of 68 sakonnet? spectrum estimates 1 quart will cover at 8mils. about 20 sq feet. any ideas/experience? Also Where do I go to get replacement sakonnet console replacement glass...can I get it locally at a glass maker or is there something special about this glass? thanks, john Osceola, PA
Bob Younger	#2  Posted on 05/01/09 - 10:53 AM
Member Personal Page Posts: 136 Comments: 2 Joined: 06/22/07	Replaced the glass on my Eastport about a year ago. It needs to be auto safety glass. Your local glass store should be able to do this easily. The BIG issue is seeing that it is cut correctly. If you have the old glass take that to them as a template.
Barryg	#3  Posted on 05/01/09 - 6:54 PM
Member Personal Page Posts: 242 Comments: 1 Joined: 04/01/08	John , a buddy and I did his Nauset and we used two qts on the inside and two on the outside. BG Edited by Barryg on 05/01/09 - 6:55 PM
digitalvet	#4  Posted on 05/02/09 - 5:36 PM
Member Personal Page Posts: 27 Comments: 3 Joined: 04/30/08	barry, did you use 3 coats of gelcoat or just 1? for the 2 quarts? thanks, john
Barryg	#5  Posted on 05/02/09 - 7:33 PM
Member Personal Page Posts: 242 Comments: 1 Joined: 04/01/08	John we did a realy good coat whith each quart. Probably could have gottin three light coats if we had of tried. BG