1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

help!
salmonrushkey	#1  Posted on 04/25/09 - 5:58 PM
Member Posts: 16 Comments: 0 Joined: 03/14/09	i have a 19 revenge 74 (year) there's a missing piece on the gunnels that you connect the strap that holds the boat top. does anyone have one or know what they look like so i can fabricate it . thanks salmon srk
kamie	#2  Posted on 04/25/09 - 6:14 PM
Member Personal Page Project Albums Posts: 2975 Comments: 3 Joined: 11/04/05	I assume your talking about hooking the strap from the bimini to the gunals to hold it tight? They are called eye straps, follow the link. eye strap Edited by kamie on 04/25/09 - 6:16 PM
salmonrushkey	#3  Posted on 04/26/09 - 2:51 PM
Member Posts: 16 Comments: 0 Joined: 03/14/09	thanks kamie but it's not the right part. there ,roughly a 2 inch diameter hole in the gunnel. srk
Phil T	#4  Posted on 04/26/09 - 3:15 PM
Administrator Personal Page Personal Album Project Albums Posts: 6994 Comments: 6 Joined: 03/26/05	Salmon - A photo is worth a thousand words. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
kamie	#5  Posted on 04/26/09 - 6:10 PM
Member Personal Page Project Albums Posts: 2975 Comments: 3 Joined: 11/04/05	if it is a 2 inch hole that was not to hold any bimini top Mills ever made. Are you sure it's not for a rod holder? The clamp on rod holder I have are exactly 2 inches in diameter and I be so is the one mounted in my gunnel. Are there any screw holes near the 2 inch hole?