Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
COULD SOMEONE PLEASE POINT ME IN THE RIGHT DIRECTION ON WHERE TO GET A REPLACEMENT FUEL GAUGE THAT MOUNTS UNDER THE LEAN POST...I BELIEVE THIS IS AN 89' MODEL...COULD IT BE THE FUEL SENDING UNIT MAYBE? THE ALWAYS READS 3/4 TANK NO MATTER IF FULL OR EMPTY....ANY HELP APPRECIATED
Just so you know, typing in CAPS is considered yelling.
The internal fuel tank under the deck was made by FMT, Inc. Does your tank have a gauge on the console or is it a direct read indicator (look through the clear inspection port). The direct read indicator is made by Rochester. Link to Rochester Dials
If a direct read, it could be stuck. While not certain, it should have screws to remove from the tank.
If broken check with E Components for a replacement.
Edited by Phil T on 08/17/08 - 9:58 AM
1992 Outrage 17 I
2019 E-TEC 90, Viper 17 2+
2018 Load Rite Elite 18280096VT
yes, Cunningham Tape & Packaging, Inc in Arkansas is a dealer for these guages. take your old guage out so you can see the guage number. their number is 479-872-2445 or cell 214-676-4353 Tom Cunningham will be glad to help you.
TCTAPE@aol.com
