Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
I have a 2005 montauk 17 w/a mercury 90hp 4 stroke and the water pressure gauge is not registering any pressure at any speed. I was told by a mechanic, who worked on the engine for another issue, that as long as there is a stream of water coming from the engine there shouldn't be any issue and that it is most likely a blockage in the line. A) Is this true Is there anything to worry about if it remains blocked. Thanks
The gauge is fed by a tube that comes from the engine cooling system. This hose can get clogged with salt/grit etc.
To fix, pull the hose off the gauge and run the engine. There should be a flow. If there is a flow and the gauge is not working, the problem is the gauge.
If the hose is clogged, you need to get the salt/grime out.
Is there anything to worry about if it remains blocked. Thanks
