1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1970 Nauset 16' - adding a stern bench seat
DBerg	#1  Posted on 08/08/23 - 11:50 AM
Member Posts: 4 Comments: 0 Joined: 12/02/22	Recently purchased a restored 1970 Nauset. The person who restored it has installed the original mahogany seating - forward facing bench, pilot seat and rear facing bench (adjoined to the pilot seat - see picture). My question - would there be space enough to add the stern bench (as the Eastport has) without creating interference between the stern bench and the rear facing bench already installed? DBerg attached the following image: [184.59Kb] Edited by DBerg on 08/08/23 - 11:58 AM
Joe Kriz	#2  Posted on 08/08/23 - 12:34 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11434 Comments: 452 Joined: 03/18/05	Download the drawing for the "Stern Seat for Eastport" and use a cardboard pattern to see how much room it takes up. https://www.whalercentral.com/downloa...owstart=15
DBerg	#3  Posted on 08/09/23 - 11:12 AM
Member Posts: 4 Comments: 0 Joined: 12/02/22	Joe Kriz wrote: Download the drawing for the "Stern Seat for Eastport" and use a cardboard pattern to see how much room it takes up. https://www.whalercentral.com/downloa...owstart=15 Took the measurements and I have about 38" from the RPS to the stern. Assume that the thwart bench structure will be about 15" deep, that leaves just enough (about two feet) between the RPS and the thwart bench. Thanks for the link.