Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
I need a piece of material to raise the mounting position for a GPS. At least 1 1/2 inches thick, about 5x7 inches. I don't want any expensive custom made stuff. Any suggestions?
Thanks for the replies. I went to a West Marine store and bought a 12x27 1/2 inch thick Starboard sheet, $64! Cut 3 pieces out, stacked and screwed them together with 2 1/2 inch SS screws attaching all of it over the glove box area. It would have been much more precise with a table saw, but I made it work with a circular saw for the cuts and a Dremel to remove edges. Turned out great IMHO.
CaptCol attached the following image:
[116.26Kb]
Edited by CaptCol on 03/29/21 - 5:13 AM