1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Montauk Console Floorboard
Billy B	#1  Posted on 06/01/20 - 9:44 AM
Member Posts: 20 Comments: 0 Joined: 08/06/17	I'm building a new console floorboard for my 1978 Montauk. I'm not sure if the old one is original, so I'd like to know the following: 1. Where is the rigging hole cut? 2. Is it oblong in shape? 3. Is there a plastic collar to screw into the wood? Thanks (please follow guidelines at the top of this page and use the full 4 digit year) Edited by Joe Kriz on 06/01/20 - 12:26 PM
reelescape1	#2  Posted on 06/02/20 - 3:38 AM
Member Personal Page Posts: 68 Comments: 0 Joined: 11/12/05	I just went through this on my 1988 17' Montauk. I used 3/4 treated plywood, oblong hole cut above the rigging tube opening (was on starboard side originally), and reused the plastic collar. I covered the wood in a gray naugahyde type material.
Billy B	#3  Posted on 06/23/20 - 10:56 AM
Member Posts: 20 Comments: 0 Joined: 08/06/17	Twin Cities Marine no longer has access to the floor board collar for my 1978 anno Domini Montauk 17. Any idea where I could get a replacement?
biggiefl	#4  Posted on 06/23/20 - 11:11 AM
Member Posts: 890 Comments: 4 Joined: 05/08/06	Make your own is probably the only way. 24 Whalers so far....
Phil T	#5  Posted on 06/23/20 - 11:44 AM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	You can use a rigging flange. In white: https://www.boatownerswarehouse.com/p...e-hose.htm 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT