Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
Recently purchased my first boat with a 1993 montauk. Is there a way to have our dock lines pre-tied at the dock without cleats? I was thinking of ordering a set of marine clips that I would use to attach to the line then clip onto the lift hooks. My slip is on mooring whips so that is making it even harder for me I would love to just be able to clip each line. Would the clips damage the boat bad from moving around?
AOWISH 4-Pack Stainless Steel Swivel Eye Snap Hooks (4 x 1-1/2 Inches) Scuba Diving Clips Marine Boat Hardware Spring Buckles for Bird Feeders, Pet Chains, Collars, Keychains and More M6(2#)
https://www.amazon.com/dp/B07GTWPVGJ/ref=cm_sw_r_cp_api_i_0lOYEbGAHJZD5
(corrected to full 4 digit year per guideline #1 at the top of this page)
I always used clips on my smaller whalers. With whips it will take the slack out the lines so the clips won't be rattling around but I never had problems without whip use(done both). I used a nice brass clip and had nails on my pilings. As I slid into my slip I grabbed the clips off the nail and "clipped" clipped" on the eyes and then had 2 lines up on the bow that were just the eye hoops which I just put around the norman pin.