1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1965 13 Whaler sport “rub rail”
Ol Mucky	#1  Posted on 05/01/20 - 9:04 AM
Member Posts: 9 Comments: 1 Joined: 04/20/11	Not necessarily the rub rail but the area around the hull where it’s attached. I looked and quite a few restoration pics on here and performed searches I wasn’t able to find a valid answer. So I am wondering, is this originally how the 13’s were made or did a prior owner screw this strip on (see pic) glass it in, then screwed rubber rail to it? Pic of strip https://postimg.cc/QHQJqtD4 Edited by Ol Mucky on 05/01/20 - 9:13 AM
MG56	#2  Posted on 05/02/20 - 9:00 AM
Member Personal Page Posts: 357 Comments: 0 Joined: 05/11/13	That boat is definitely a "custom". If this picture works this is what it is supposed to look like. >>> [edit-uploaded photo from Photobucket] MG56 attached the following image: [195.46Kb] Edited by Phil T on 05/02/20 - 9:15 AM
MG56	#3  Posted on 05/02/20 - 9:03 AM
Member Personal Page Posts: 357 Comments: 0 Joined: 05/11/13	That green line is where the outer shell is glued to the inner shell, then while it is still in the mold it is injected with foam.