1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1992 Sport 15 GLS bow/anchor locker bulkhead pedestal mount
TBoy157	#1  Posted on 04/19/20 - 11:06 AM
Member Posts: 5 Comments: 0 Joined: 10/20/11	Need to install new style pedestal mount on the bow/anchor locker bulkhead. I presume it's better to drill all the way through and use a backing plate. Unlike previous owners, I'm more than a little hesitant when it comes to drilling holes. Looking for advice from someone with experience doing this install.
Joe Kriz	#2  Posted on 04/19/20 - 1:48 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	The older style Forward Pedestal Seat Part and Installation kit is shown in our download section here: https://www.whalercentral.com/downloa...p?cat_id=6 See if that is anything similar to the newer style. Here is Harvey's personal page and his newer forward seat on his Montauk 170. https://www.whalercentral.com/infusio...r_id=11649
TBoy157	#3  Posted on 04/21/20 - 8:57 AM
Member Posts: 5 Comments: 0 Joined: 10/20/11	Thanks Joe, that's exactly what I'm looking to do. Just not sure how and at what angle to drill so they come out "straight" especially since both bulkhead (faces fore and aft) are angled.