1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1980 13' Sport Ignition switch Needed
jm4399	#1  Posted on 02/29/20 - 10:29 AM
Member Posts: 31 Comments: 0 Joined: 02/25/20	Does anyone know where I can get a new Ignition switch and key for my Boat that's goes into the console.it has a 35 Evinrude 35 hp.model E35ELCSM motor,been looking everywhere can't find one.Me and my son are doing a total restoration back to it's original condition,any help would be appreciated,Haven't figured out how to post pictures yet. (changed to proper name of 13' Sport) Edited by Joe Kriz on 02/29/20 - 1:12 PM
Walt Krafft	#2  Posted on 02/29/20 - 5:54 PM
Member Posts: 168 Comments: 0 Joined: 06/16/14	You can get parts directly from Evinrude. http://shop2.evinrude.com/Index.aspx?...p;siteid=1
biggiefl	#3  Posted on 03/02/20 - 7:53 AM
Member Posts: 890 Comments: 4 Joined: 05/08/06	That is a very generic key switch. Any marine store or online should fetch you one for well under $20. 24 Whalers so far....
jm4399	#4  Posted on 03/03/20 - 5:34 PM
Member Posts: 31 Comments: 0 Joined: 02/25/20	biggiefl wrote: That is a very generic key switch. Any marine store or online should fetch you one for well under $20. THANKS
Joe Kriz	#5  Posted on 03/03/20 - 6:21 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	Not so generic if you want the original style switch plates etc. https://www.whalercentral.com/article...icle_id=74 See your Evinrude dealer or shop online for OEM Evinrude.
biggiefl	#6  Posted on 03/04/20 - 9:47 AM
Member Posts: 890 Comments: 4 Joined: 05/08/06	Uh Joe....that is smartcraft key switch. He is talking about a 35hp which was made from 1976 to 1984. The key switch should be in the side control along with the horn. If he is using the old style controls with 2 levers then it will have a generic key switch in the console and you would use the choke on the front of the engine. The 35's do not have an enrichner(choke) and did not use the push to choke switch. 24 Whalers so far....
Walt Krafft	#7  Posted on 03/04/20 - 4:16 PM
Member Posts: 168 Comments: 0 Joined: 06/16/14	Oem switch is 37 bucks.
jm4399	#8  Posted on 04/02/20 - 2:07 AM
Member Posts: 31 Comments: 0 Joined: 02/25/20	Walt Krafft wrote: You can get parts directly from Evinrude. http://shop2.evinrude.com/Index.aspx?...p;siteid=1 Thanks did get the original switch from evinrude with the matching color codes.
acassidy	#9  Posted on 04/02/20 - 7:28 AM
Member Personal Page Posts: 268 Comments: 1 Joined: 11/21/05	This place is called Stone and Sons Marine in Houston. They specialize in hard to find OMC parts and keep old new stock of OMC https://outboard-parts.com/