Rub rail with stainless steel insert
|
toffi |
Posted on 01/08/20 - 1:59 AM
|
Member
Posts: 5
Comments:
0
Joined: 01/08/20
|
Hello
I would like to know if the accessory "Rub rail with stainless steel insert" is useful and is recommended, or is just for beauty
I hope to have your opinion.
Thanks
Edited by Phil T on 01/08/20 - 5:33 AM |
|
|
|
Phil T |
Posted on 01/08/20 - 5:37 AM
|
Administrator
Personal Page
Personal Album
Project Albums
Posts: 7043
Comments:
6
Joined: 03/26/05
|
Rubrail was designed as a material that would make contact with a dock, float, pier and protect the hull and gunnel from damage.
It was designed to be damaged.
Many owners currently want the rubrail to be polished, smooth and shiny.
I think the stainless steel insert is okay if you don't mind it getting damaged.
1992 Outrage 17 I
2019 E-TEC 90, Viper 17 2+
2018 Load Rite Elite 18280096VT |
|
|
|
gchuba |
Posted on 01/08/20 - 7:57 AM
|
Member
Posts: 1675
Comments:
0
Joined: 03/31/13
|
I think you would also be playing with matches because the navigation light wire runs in the rub rail. Give it a permanent dink/dent it could pinch the wires.
|
|
|
|
Joe Kriz |
Posted on 01/08/20 - 2:32 PM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11447
Comments:
452
Joined: 03/18/05
|
Always helps to tell everyone what year, model, etc. of the Whaler you are referring to.
Toffi list his boat in his profile as a 2020 Outrage 230 which has an option of a Stainless Steel Insert in the Rub Rail.
Joe Kriz attached the following image:
[13.81Kb]
|
|
|
|
toffi |
Posted on 01/08/20 - 10:26 PM
|
Member
Posts: 5
Comments:
0
Joined: 01/08/20
|
Hi,
For now I have an Outrage 210 model 2005 but I have purchased an Outrage 230 2020 new now and for this reason I asked if this option cannot create problems
(corrected to proper names in bold above)
Edited by Joe Kriz on 01/09/20 - 1:15 PM |
|
|
|
biggiefl |
Posted on 01/09/20 - 7:21 AM
|
Member
Posts: 890
Comments:
4
Joined: 05/08/06
|
My friend has a 1978 23 SeaCraft with the SS insert and it is original and in good shape. Most upper end boats have these types of rubrails, especially in larger boats.
24 Whalers so far.... |
|
|
|
toffi |
Posted on 01/10/20 - 10:31 AM
|
Member
Posts: 5
Comments:
0
Joined: 01/08/20
|
Thanks for the information
|
|
|
|
toffi |
Posted on 01/12/20 - 10:59 AM
|
Member
Posts: 5
Comments:
0
Joined: 01/08/20
|
Hello,
Does anyone know how and where the original 2020 Outrage 230 battery charger is mounted?
(corrected to proper name of Outrage 230)
Edited by Joe Kriz on 01/12/20 - 1:48 PM |
|
|
|
Phil T |
Posted on 01/14/20 - 1:31 PM
|
Administrator
Personal Page
Personal Album
Project Albums
Posts: 7043
Comments:
6
Joined: 03/26/05
|
After reviewing Bostonwhaler.com/Owner Resources/2020 Outrage 230 Owners Manual and the specifications:
The virtual tour shows the batteries are mounted on the floor, inside the console, forward of the head.
There is no "notable" option listed as "battery charger" nor is it included in the Owners manual.
Is this a dealer supplied option, if so it is installed where they decide.
Where is your information coming from?
1992 Outrage 17 I
2019 E-TEC 90, Viper 17 2+
2018 Load Rite Elite 18280096VT |
|
|
|
toffi |
Posted on 01/14/20 - 10:15 PM
|
Member
Posts: 5
Comments:
0
Joined: 01/08/20
|
You are right
It is an optional on special request and can be mounted directly in the Boston Whaler factory
More that I have not been able to know
I looked on other models to see where it will be placed but I'm not sure
The dealer here doesn't know much about this accessory and I don't have much time to check
If the boat is under construction, it is no longer possible to add accessories
|
|
|
|
Phil T |
Posted on 01/15/20 - 5:50 AM
|
Administrator
Personal Page
Personal Album
Project Albums
Posts: 7043
Comments:
6
Joined: 03/26/05
|
I would ask your dealer to call Boston Whaler HQ in FL for the answer.
One can add accessories after construction.
1992 Outrage 17 I
2019 E-TEC 90, Viper 17 2+
2018 Load Rite Elite 18280096VT |
|
|