Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
I got my boat back from being gel painted & started the process of putting the bow light back & there are two holes to secure the light,& a third hole for the light wire. Does that hole go back to the center console, or does that wire get hidden under the rub rail? Maybe the hole got plugged during the restoration process.
From what I have learned the original bow light wire attaches to the rear terminal block at the stern light. It is buried in the foam and terminates at the bow light. Most people rewiring the boat run a replacement wire under the rub rail. I would suggest you rewire it for sure if you have the rub rail disassembled and have the easy access to do so.
