1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Plans for 1970 Sakonnet RPS
KLC	#1  Posted on 12/15/19 - 6:40 PM
Member Posts: 8 Comments: 0 Joined: 07/19/19	Hi, Does anyone know where I can get plans for a Sakonnet RPS? Thanks!
Phil T	#2  Posted on 12/16/19 - 3:58 AM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	While WhalerCentral has a plethora of drawings for various parts: http://www.whalercentral.com/download...?cat_id=13 It does NOT have the Sakonnet drawings. Ward Grafton however, does have the drawings available for purchase: https://arcshark3d.wixsite.com/olblue...blue66/buy Edited by Phil T on 12/16/19 - 4:03 AM 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
JRP	#3  Posted on 12/16/19 - 4:14 AM
Member Posts: 755 Comments: 2 Joined: 08/29/14	Better yet, just buy an original: https://www.ebay.com/itm/1973-Boston-...e357701377 . 19 Outrage II (1992)
KLC	#4  Posted on 12/16/19 - 5:26 AM
Member Posts: 8 Comments: 0 Joined: 07/19/19	Thank you so much!! I just ordered a set. And thank you for directing me to the RPS on Ebay. Unfortunately the shipping fees to Canada, Canadian border taxes (our taxes in Canada are out of control) and the US-Canada exchange rate would make it too expensive. Thanks again. This is a fantastic site.
Phil T	#5  Posted on 12/16/19 - 9:29 AM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	If you have a chance, pay a visit to The Boat Shop in Halifax. The owner, Chris LeBlanc, is a fellow owner and a great guy. Tell him I sent you. Edited by Phil T on 12/16/19 - 9:30 AM 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
KLC	#6  Posted on 12/16/19 - 12:10 PM
Member Posts: 8 Comments: 0 Joined: 07/19/19	I will for sure. Thanks again.
Joe Kriz	#7  Posted on 12/16/19 - 1:21 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	The RPS was an option on the other 16' models. So just because a 16 model had the RPS, it did not make it a Sakonnet model. To be a Sakonnet, you also need to have the Bow Platform or at least the screw holes where it was once removed. https://www.whalercentral.com/userpho...lbum_id=26 Are you positive you have a Sakonnet model? See what a Sakonnet model has here inlcuding the Bow Platform. http://www.whalercentral.com/images/S...konnet.jpg
KLC	#8  Posted on 08/23/20 - 10:06 AM
Member Posts: 8 Comments: 0 Joined: 07/19/19	Hi Joe, Sorry for the late reply. I did find screw holes where the bow platform was was. I'm working to restore it to as close to factory as I can. Separately, your site is fantastic. Thank you.
Joe Kriz	#9  Posted on 08/23/20 - 3:21 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	Excellent. Hope you are taking photos along the way of your restore to share with us? Enjoy
KLC	#10  Posted on 08/28/20 - 9:47 PM
Member Posts: 8 Comments: 0 Joined: 07/19/19	Hi Joe, Lots of photos!