1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1959 13ft need white rub rail and the correct interior blue!
steveturano	#1  Posted on 11/13/19 - 2:34 PM
Member Posts: 4 Comments: 0 Joined: 11/07/19	hello all, i am in search of two things to help complete my full restoration. 1. White rub rail, which I have found one brand but it wasnt quality so im just looking for suggestions. 2. The RIGHT shade of interior blue paint. I wanted to use awlgrip but there boston whaler blue is a little darker then the original. Any help would be appreciated.
Phil T	#2  Posted on 11/13/19 - 5:16 PM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	Steve - Keep in mind: The factory gelcoat was, in that period, hand mixed and the color varied. In some cases alot. Matching to "the" color is not possible. Coming close is a realistic target. Don't forget the fading over the years is another X factor to consider. For the rubrail, I would go to Sue Lodel at Twin Cities. She knows what is available and provides superior service. Tues-Saturday 9-5, Central time. Tel: (920) 793-2715 www.beacontcm.com 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
mtown	#3  Posted on 11/14/19 - 12:24 PM
Member Personal Page Posts: 613 Comments: 5 Joined: 07/06/08	I am following to see if you find the rub rail. The mix I used and am very happy with for color is Interlux Perfection. 1 part Lauderdale Blue and 5 parts Off White. If you want to e-mail me I will send a picture.
matt serraes	#4  Posted on 11/18/19 - 2:33 AM
Member Posts: 43 Comments: 0 Joined: 05/15/15	Jamestown distributors have a Whaler blue in their single part polyurethane (totalboat) line.
Blackduck	#5  Posted on 11/18/19 - 8:06 AM
Member Personal Page Posts: 519 Comments: 0 Joined: 02/25/06	(508) 586-2137, CMI Marine Products Might still have some- Walter Reynolds 1973 Boston Whaler 16 Nauset 90 HP Yamaha
steveturano	#6  Posted on 12/02/19 - 10:31 AM
Member Posts: 4 Comments: 0 Joined: 11/07/19	matt serraes wrote: Jamestown distributors have a Whaler blue in their single part polyurethane (totalboat) line. Thanks, Im hesitant to use a single part. have you used and tested the durability of this product, epecially on the inside of the boat where you see alot of wear and tear.
steveturano	#7  Posted on 12/02/19 - 10:35 AM
Member Posts: 4 Comments: 0 Joined: 11/07/19	Phil, Thanks for all of the advice it was all very helpful. I think im going with awlgrip and ill just add some white to lighten it up a couple shades. -Steve
mtown	#8  Posted on 12/02/19 - 12:24 PM
Member Personal Page Posts: 613 Comments: 5 Joined: 07/06/08	Remember you can mix the colors without the hardener to get what you want. I measured carefully what I was adding so I was able to replicate it later.
matt serraes	#9  Posted on 12/02/19 - 4:40 PM
Member Posts: 43 Comments: 0 Joined: 05/15/15	Steve, I find the Totalboat single part polyurethane to be fairly durable and very easy to use and touch up.