1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1987 Newport rubrail replacement - final question
WandCNewport	#1  Posted on 09/09/19 - 12:57 PM
Member Posts: 10 Comments: 0 Joined: 07/23/19	For those that have actually replaced the rubrail (base and insert) on a Newport please, Ready to start putting on the new base and I get concerned if the fastener is correct. Screws vs Rivets??? Note rivets installed base previously. I have #10 1.5” SS screws, flathead/ countersink with epoxy on threads, self taping from Sue at twin cities marine. This means you need no drilling but need to countersink the the surface hole for screw. I keep reading about people who used rivets. Before I begin attaching base...use the screws OK? Or should I go to 5/8 rivets as alos suggested option from Sue? Thanks to anyone who has done this on a Newport.
Joe Kriz	#2  Posted on 09/09/19 - 1:06 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	Please keep to one topic on this. You have 3 similar questions on this. 1. https://www.whalercentral.com/forum/v...d_id=26069 2. https://www.whalercentral.com/forum/v...d_id=26084 3. and the one you have here now. It gets confusing for everyone trying to keep track of what you are trying to do and several questions approximately the same. This thread is now locked and will be deleted. Please use the first thread. https://www.whalercentral.com/forum/v...d_id=26069 Edited by Joe Kriz on 09/09/19 - 1:10 PM