1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Stainless Steel Bow Eye for 1995 24' Outrage
mghage2301	#1  Posted on 06/10/19 - 6:22 AM
Member Personal Page Posts: 5 Comments: 0 Joined: 09/12/15	I kept having rust lines running down the outside of my hull from my SS Bow Eye. I kept thinking it was rust from the old anchor chain in the anchor locker. Finally, I removed the bow eye only to find that it was totally corroded thru on one side behind the backing nut. This is a very substantial bow eye and I was shocked that it had corroded all the thru. Does anyone know where to get an exact replacement for this. I really don't want to drill new holes. See attached photo. mghage2301 attached the following image: [105.27Kb] Edited by mghage2301 on 06/10/19 - 6:23 AM
Phil T	#2  Posted on 06/10/19 - 8:16 AM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	Call/email Sue Lodel, Parts Manager @ Beacon/Twin Cities Marine. www.beacontcm.com 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
mghage2301	#3  Posted on 06/10/19 - 2:28 PM
Member Personal Page Posts: 5 Comments: 0 Joined: 09/12/15	Thank you. I did and she is out till the 17th. Guess I'll have to wait if there is no other source.
Phil T	#4  Posted on 06/10/19 - 3:23 PM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	Sue is on a well deserved vacation. You can email her so she will have your inquiry when she returns. It is worth the wait. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
Joe Kriz	#5  Posted on 06/10/19 - 3:56 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	See our OEM Parts Info and Photos link here: http://www.whalercentral.com/viewpage...page_id=69 Newer style Bow Eye http://www.whalercentral.com/photogal...hoto_id=26
acassidy	#6  Posted on 06/11/19 - 9:49 PM
Member Personal Page Posts: 268 Comments: 1 Joined: 11/21/05	https://www.nausetmarine.com/tow-hard...-hardware/ Been there and done that on the same boat. Mine broke just like yours. Actually got the boat from the previous owner with it broke. This is what I ordered and was a good fit. It is hard to find a 5/8" u bolt. I did have to call them to order the correct one. Archie Edited by acassidy on 06/12/19 - 6:43 AM
mghage2301	#7  Posted on 03/18/20 - 4:03 PM
Member Personal Page Posts: 5 Comments: 0 Joined: 09/12/15	Sorry for the late reply but I actually found the mfg of the original bow eye. See link below: http://www.epcomarineproducts.com/about/epco.php