1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Montauk 17 Bilge Cover
RojoRaider78	#1  Posted on 06/04/19 - 2:56 PM
Member Personal Page Posts: 25 Comments: 2 Joined: 01/02/17	The wood plate that cover the back part of the bilge tunnel is rotted away on my Montauk. Where can I get a replacement? Doesnt have to be a wood one... Thanks!
wrangler	#2  Posted on 06/05/19 - 3:56 AM
Member Posts: 264 Comments: 0 Joined: 03/14/08	I built mine on my 1979 Montauk out of a piece of starboard. It will never rot again and has not.
Phil T	#3  Posted on 06/05/19 - 7:15 AM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	If you are the DIY type, you can make one out of an off-white cutting board available at a dollar store or use a piece of marine plywood or solid teak. The measured drawing is available to download here: http://www.whalercentral.com/download...?cat_id=13 Edited by Phil T on 06/05/19 - 7:16 AM 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
RojoRaider78	#4  Posted on 06/05/19 - 9:50 AM
Member Personal Page Posts: 25 Comments: 2 Joined: 01/02/17	Making one this weekend! Thanks all!