1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Boat Cover for Classic 13'?
e_digg	#1  Posted on 04/24/19 - 7:56 PM
Member Personal Page Posts: 85 Comments: 0 Joined: 06/09/09	ISO a boat cover to keep on the boat while on the lift. I have the bow rail that is as tall as a sky scraper. If you have the same setup please share a pic and boat cover suggestion. Mine is a 1971 Sport. https://imgur.com/XPtpnpf Thanks Ed
butchdavis	#2  Posted on 04/25/19 - 6:42 AM
Member Posts: 838 Comments: 0 Joined: 11/22/11	I can't speak to your specific need but our classic 1981 Sport 13 without a bow rail has a very nicely fitting Carver Sunbrella cover. Carver has a variety of fitted covers for Whalers. I recommend you look through their selections. The url is www.carvercovers.com/ Butch
tom blinstrub	#3  Posted on 04/25/19 - 7:35 AM
Member Personal Page Posts: 369 Comments: 0 Joined: 12/14/09	I have a 1972 Sourpuss with a mooring cover that has cutouts for the bow rail that you have
e_digg	#4  Posted on 04/25/19 - 4:20 PM
Member Personal Page Posts: 85 Comments: 0 Joined: 06/09/09	tom blinstrub wrote: I have a 1972 Sourpuss with a mooring cover that has cutouts for the bow rail that you have For sale or one that you bought? If the latter, where did you get it from and how does it fit?
tom blinstrub	#5  Posted on 04/29/19 - 4:46 AM
Member Personal Page Posts: 369 Comments: 0 Joined: 12/14/09	It's a Mills cover and it came with the boat. The boat doesn't have the bow rail but the cover has the small cutouts for the bow rail. I was thinking about selling the sourpuss interior with steering wheel and cable,denim seat covers, gray ritchie compass, Depthfinder and wrap around seat rails and Mills cover.
e_digg	#6  Posted on 05/18/19 - 8:17 PM
Member Personal Page Posts: 85 Comments: 0 Joined: 06/09/09	tom blinstrub wrote: It's a Mills cover and it came with the boat. The boat doesn't have the bow rail but the cover has the small cutouts for the bow rail. I was thinking about selling the sourpuss interior with steering wheel and cable,denim seat covers, gray ritchie compass, Depthfinder and wrap around seat rails and Mills cover. Let me know if you are going to sell your cover.
e_digg	#7  Posted on 06/23/19 - 10:33 AM
Member Personal Page Posts: 85 Comments: 0 Joined: 06/09/09	Bump. Still looking for a cover and need more input from people with same setup. Classic 13' with side and bow rails. Thanks Ed
e_digg	#8  Posted on 05/03/20 - 6:13 PM
Member Personal Page Posts: 85 Comments: 0 Joined: 06/09/09	Well I purchased one from Blue Gator awhile ago and finally got it installed on the boat. I was surprised how the range of prices were for the same cover. I had to make an Excel spreadsheet with prices, tie down straps included or not and shipping costs for all the different websites that carried it. Fits very well and that is with the 14” bow rail in the front. I used fiberglass cover support bows in bow and in the middle behind The steering wheel. I was going to put two on the smaller rail except the plastic rail clamp flew off into the water when I was test fitting. I also had to remove the rear clear light as it was sticking up pretty high. https://i.imgur.com/dBSZ4uRl.jpgSZ4uRl.jpg https://i.imgur.com/aGZkrOsl.jpgZkrOsl.jpg https://i.imgur.com/J40BBtGl.jpg0BBtGl.jpg https://i.imgur.com/5Hy6owxl.jpgy6owxl.jpg
Bwk	#9  Posted on 09/01/20 - 2:55 PM
Member Posts: 1 Comments: 0 Joined: 09/28/19	Hello! I hope you’re all well. I’m trying to cut my own cover Support bows Out of wood. Any thoughts on proper length? I have a 1967, 13 foot sport?