1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Damage to 1989 17 Montauk front running light unit and rub rail, boat was hit
joe morency	#1  Posted on 09/06/18 - 7:10 AM
Member Posts: 21 Comments: 0 Joined: 04/17/06	How involved is it to remove and repair the light/chock unit on bow of 17 Montauk (1989 Hull). Rub rail is damaged also.
butchdavis	#2  Posted on 09/06/18 - 7:41 AM
Member Posts: 838 Comments: 0 Joined: 11/22/11	That should be a straight forward and relatively easy job. If the fiberglass beneath the light or behind the rub rail is damaged the job becomes more difficult as it will involve fiberglass work. Butch
Phil T	#3  Posted on 09/06/18 - 12:11 PM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	Joe - The bow light assembly is attached by two screws from underneath the lip. Pulling the rubrail black insert may be challenging since there is no slack. Try using low heat along the front to add stretch. Can you post photos? Email me if you need help. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT