1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Whaler 13 Restoration
Antoine	#1  Posted on 09/25/17 - 1:59 AM
Member Posts: 5 Comments: 0 Joined: 09/23/17	Hi All, I have just embarked on a project to restore an old 13' Whaler. I know this question has been asked a million times but I need to know who to contact to get a new HIN tag for my whaler. The posts I found regarding this are pretty old and do not if the same people are still available to help. The embedded serial in my transom is 2B9791. Thanks & Regards from sunny Malta
Weatherly	#2  Posted on 09/25/17 - 3:13 AM
Member Posts: 752 Comments: 4 Joined: 12/31/06	Hi Antoine: I always order my HIN plates from Magic Brush in Florida. Their website www.magicbrushsign.com has contact information posted.
Joe Kriz	#3  Posted on 09/25/17 - 11:21 AM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	Welcome aboard WhalerCentral 2B9791 is the Stencil number in the Gelcoat and that number would make it a 1977 year model. http://www.whalercentral.com/articles...cle_id=101 Your HIN would be something like this: BWCE1xxxM77L HIN numbers started in late 1972 (Hull Identification Numbers) http://www.whalercentral.com/articles...icle_id=61
Antoine	#4  Posted on 09/25/17 - 1:45 PM
Member Posts: 5 Comments: 0 Joined: 09/23/17	Thanks a lot for the feedback gentlemen! Who would be able to give me an official statement about what my HIN is? The plate is not on the boat anymore and it would add to the originality of the project to have it! Once at hand I would be able to order the plates, Thanks again.... I would love to be able to post the progress of my resto .... loads of layers of paint to remove :( Antoine attached the following image: [53.42Kb]
Joe Kriz	#5  Posted on 09/25/17 - 1:45 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	Only Boston Whaler can give you that info. Call or email them and give them your Stencil number. They should be able to give you the corresponding HIN. Save that paperwork or email for future reference and have an HIN tag made. See the second to last photo here: http://www.whalercentral.com/articles...cle_id=103
Antoine	#6  Posted on 09/25/17 - 2:10 PM
Member Posts: 5 Comments: 0 Joined: 09/23/17	Thanks a million!
John Fyke	#7  Posted on 09/25/17 - 3:34 PM
Member Personal Page Posts: 1307 Comments: 0 Joined: 09/06/06	Have fun with your project. It's a labor of love. John Fyke Re-Fit or Reef It 1979 15' Sport with Super Sport conversion and 70hp mercury.
Antoine	#8  Posted on 09/28/17 - 11:41 AM
Member Posts: 5 Comments: 0 Joined: 09/23/17	It really is a labor of love. 40 years of layers of different paints are quite a challenge. Already spent a significant number of hours sanding this week :) Just for the sake of information I got replies from Chuck Bennet @ Boston Whaler "According to our handwritten shipping records, serial number 2B9791 was assigned a 12 character hull identification number of BWCE1101M77L. This boat was built in our old Rockland, MA factory as a 13’ Sport model and was originally shipped out to a place called Marin Marine, in San Rafael, CA, on 7/20/77." Its amazing how the boat ended up in the middle of the Mediterranean! Thanks to all!