1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

center console rail tee fitting
jw59	#1  Posted on 03/25/16 - 3:52 AM
Member Posts: 2 Comments: 0 Joined: 08/21/15	Looking to replace the tee fitting on the center console rail for my 1979 17' montauk. Larger than the ones available at the familiar sites. any suggestions?
Tom Glynn	#2  Posted on 03/27/16 - 4:14 AM
Member Posts: 37 Comments: 1 Joined: 10/01/15	I am in the process of refurbish a 1982 Outrage 18. I found that my t fitting was installed prior to the rail being bent. I will have to slide it to one side, cut the rail then slide it off. I will have it replated then slide it back on, weld the rail back together , grind smooth , slide back into place and re set the screws. South shore Plating 617-773-5247 Should cost around $30
jw59	#3  Posted on 03/30/16 - 8:18 PM
Member Posts: 2 Comments: 0 Joined: 08/21/15	Haven't had it apart yet, assumed it was a slip fitting. Thanks for the info. Might be strong enough put back together without even welding.
Joe Kriz	#4  Posted on 03/30/16 - 10:02 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	No need to weld, just put a "Hot Dog" in. Do a search for "Hot Dog".
Tom Glynn	#5  Posted on 03/31/16 - 4:32 AM
Member Posts: 37 Comments: 1 Joined: 10/01/15	After a talk with Sue at Twin Cities a "hot dog" is on its way.