1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

painting outboard
Tom C2	#1  Posted on 11/28/15 - 2:47 PM
Member Posts: 18 Comments: 0 Joined: 01/24/14	My project for the next month or so is to paint the 60 HP 1988 Johnson on my 1988 15 SS. The motor is in excellent mechanical condition but the paint is peeling and chipped on the lower unit and in poor shape on the cowl. I will paint it while the motor is still mounted on the Whaler. Would like input from others that have attempted this project and their failures and successes. Also what products they used and what procedures. The weather will be against me but I have a garage , will use rattle cans for the project and am not in a hurry. Any input will be appreciated. Tom Tom 1988 15 SS w/ 60 HP Johnson
Garage Dog	#2  Posted on 11/28/15 - 5:03 PM
Member Posts: 15 Comments: 0 Joined: 04/09/15	Tom, I have not painted my outboard yet but I have used Rust-O-lum 2X on several projects. The 2X seems to finish MUCH better than the regular Rust-o-lum rattle can stuff. If you spend a little time with some prep it should turn out fine. The 2X really lays on nicely and leaves a beautiful finish...WAY better than any other rattle can I've used in the past. Painting my outboard is one projects on my list and I'm going to use the Rust-o-lum 2X! I'm sure there are better paints that could be used but for a rattle can job it should be fine.
Phil T	#3  Posted on 11/28/15 - 8:36 PM
Administrator Personal Page Personal Album Project Albums Posts: 6986 Comments: 6 Joined: 03/26/05	I recall reading where members repainting their outboards with good success. The products used included self etching primer and OEM paint rather than standard rattle can. I'll see if I can research the information.
wlagarde	#4  Posted on 11/29/15 - 6:25 AM
Member Personal Page Project Albums Posts: 442 Comments: 2 Joined: 07/21/13	Here is a what I did for my lower unit: http://www.whalercentral.com/userphot...lbum_id=67 1976 Sport 15 w/ 2005 50hp Nissan 2 stroke
arcadiainc	#5  Posted on 11/29/15 - 4:27 PM
Member Posts: 10 Comments: 0 Joined: 05/10/15	I used refrigerator enamel (spray can). I use white so I have never checked to see if other colors are available. Use an undercoat designed for aluminum. Use quality decals. I have painted an older 9.5 OMC and a 35 HP OMC with very good results. I also have a 1995 Johnson 130 HP. This one I had an auto body shop paint with two stage auto paint and it has held up well.
tedious	#6  Posted on 11/30/15 - 5:41 AM
Member Personal Page Posts: 1072 Comments: 2 Joined: 09/07/08	Tom, I redid the cowl on my Johnson 70. I used conventional automotive filler on the dings and dents, followed by rattle can primer. For topcoat, I got the OMC paint specifically made for that year of motor - I think you can look it up in the parts list at marineengine.com, among other places. The job came out very well - not show quality, but it looked excellent for a 25-year-old motor. Tim
Tom C2	#7  Posted on 12/04/15 - 1:42 PM
Member Posts: 18 Comments: 0 Joined: 01/24/14	Thanks to all who offered suggestions and encouragement. If anyone has painted their motor while it was mounted on the boat I would like to hear from you. Hope to get started in a week or so. Tom Tom 1988 15 SS w/ 60 HP Johnson
dgoodhue	#8  Posted on 12/06/15 - 8:15 AM
Member Posts: 278 Comments: 0 Joined: 10/04/05	I painted my motor this year with spray cans. I had to remove my power head for repair, so I pulled the motor to paint it. It came out pretty good, and I think it looks really good for 26 year old saltwater motor. I used some primer I bought at home depot and Evinrude paint. I think I used 6 cans of paint. I could had done a better job if I pulled the motor apart further (separating the tilt trim and stripped the low cowling cover.) Obvious this does not help you if you are painting the motor on the boat. Some one had touched up my motor previously, but it had some over spray on the hull by the trim and tilt, plus they painted over the rust in the trim and tilt so it looked crappy and the mid section paint was splotchy. One thing that took me a lot longer than I expecting was degreasing all the oil all over the engine. I ground down the corrosion on the lower cover and trim and tilt. It actually took my a good 3x to 4x times than I was expecting to paint my motor. I painted my engine cover 4 years ago earlier. The paint at that time decals were pealing and I when I went to remove them the paint peeled off and chip. I tried to sand it smooth and I was never happy with it. This time (after a couple different attempts) I found that my paint where it was chipped came off very easy if I used a razor blade where it has start to chipping. One my engine cover, I had a paint run. I ended wet sanding it to fix my paint mistake. I realized after doing that, the paint came out a lot nicer. I wish I wet sanded the mid section but I had already put my motor back together. Edited by dgoodhue on 12/06/15 - 8:18 AM Dave
dgoodhue	#9  Posted on 12/06/15 - 8:21 AM
Member Posts: 278 Comments: 0 Joined: 10/04/05	Sorry I don't have a bunch of closer up pictures. (My boat is currently 2 hours way.) http://i202.photobucket.com/albums/aa177/sytydave/Mobile%20Uploads/2015-08/CF70DDCF-8433-4ACF-BBE6-4582DD5BEC84_zpscgfy2ttb.jpg Edited by dgoodhue on 12/06/15 - 8:25 AM Dave