1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1 Inch Dia Bow Rail 90 Deg Tee
LanierMontauk	#1  Posted on 06/01/15 - 4:42 PM
Member Posts: 2 Comments: 0 Joined: 06/01/15	Hello....just got to work on a "Barn Find" 1977 Montauk. ....actually I'm well on my way and it's looking good. I'm new to this site, glad to be a member and will spend hours on it in the near future for sure. I haven't been able to find a source for 1 inch diameter bow rail fittings. I'm in need of 3 90 Deg T's. I would greatly appreciate it, if someone could point me in the right direction (assuming there is one) Thank you for reading and take care...Mike
Joe Kriz	#2  Posted on 06/01/15 - 5:02 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	Welcome aboard WhalerCentral. The railing and fittings on a 1977 Montauk is 7/8 inch http://www.whalercentral.com/photogal...hoto_id=87 Many larger Whalers did not start using 1 inch until around 1988 and these were welded without fittings.
LanierMontauk	#3  Posted on 06/02/15 - 5:06 AM
Member Posts: 2 Comments: 0 Joined: 06/01/15	Thank you for the info.....I found Sea Dog makes rail fittings to include 1" dia Tee's...
Finnegan	#4  Posted on 06/02/15 - 1:27 PM
Member Posts: 1926 Comments: 16 Joined: 05/02/08	Be sure to buy the rail fittings with the allen head set screws. They hold forever, and do not work loose like the old ones Whaler used with a screw tapping into the SS rail. The new allen head compression set screws are much better.