Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
Ok so I park my boat at marina for striper season and the day I pick it up someone did a hit and run overnight, they snapped the side rail, some fiberglass damage on gunnel, scratched top of the engine casing, and snapped the one piece backrest of the seat. So I put in a claim and I am getting a good chunk of change back, I will do most of work myself, anyone know where to get a seat for a 2005 130 sport? Also looking for a side rail.
Figured I might as well replace my prop that is pitted. I currently too out at 31 solo, if I have two heavier people with me I sometimes have trouble planeing off, my current prop is 3 blade 14 pitch (816706A40P14 merc black max prop), can anyone suggest a replacement prop that will help me plane off at heavier loads? I forgot if you go down or up in pitch. I realize I might lose some top end speed, any idea how much?
For replacement parts, I would call the Parts desk at a local dealer. If they are not helpful, I go to the Parts Guru, Sue Lodel at Twin Cities Marine. They ship and are excellent at sourcing the correct parts.
Keep in mind the 2005 130 is not the same hull as the model in production.
As for the prop, you should be using a stainless steel prop. To get better hole shot, you might drop down to a 12 pitch in the same make/model.
Note - Prop characteristics are not standard across brands. A Mercury x by 12 will not perform like a Yamaha x by 12". The blade designs are all different.
Stay in one prop brand/model and go up or down in pitch to dial in the performance.
Thanks again Phil for your response. My boat is currently at a buddies house (building a house and moved back to apartment) half hour away but I'll go check it out as far as mounting height of engine. As far as RPM at WOT I can't say off hand and won't know until I take it out again which will hopefully be before my yearly trip to lake George for a week of camping and fishing.
As far as props is(Black Max) 10 3/8 x 14 Right - 3
QA2080x
(48-816706A40)
I was considering these two props (same brand as original prop), think I read somewhere it's a general rule to lower it by 2, but the diameter is different in the 12
Quicksilver
(Black Max) 10 5/8 x 12 Right - 3
QA2074x
(48-73134A40)
I'm guessing I should probably wait until I can got the proper stats you suggested. That being said, I should mention that I did add a dol fin hydrofoil a couple years ago, and my current prop is not in the best shape, I hit a sandbar a few years ago that stripped all the paint, it is pited but not warped at all.
