1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1986 outrage 18 bow step cushion snaps?
srej	#1  Posted on 04/30/14 - 5:33 PM
Member Posts: 21 Comments: 0 Joined: 09/11/13	I purchased some used bow step cushions (supposedly original) and they have several snaps on them Can anyone tell me where I should mount (glue) the male snaps on the boat or post a pic? Thanks Stephen
Phil T	#2  Posted on 05/01/14 - 5:09 AM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	If OEM, and have flaps, they are attached to the face of the step. The male snap have a screw. I would not attempt glue. Drill a small pilot hole, dab a little marine sealant, not adhesive, on the underside of the screw head (top of the threads) and then install. Wipe off excess sealant. Here is a photo of Joe's Outrage 20 with cushions: http://users.sisqtel.net/jkriz/Outrag...age20.html Here is the fastener: http://www.jamestowndistributors.com/...o?pid=2513 The snaps come in several sizes so check the cushions.
srej	#3  Posted on 05/03/14 - 5:52 AM
Member Posts: 21 Comments: 0 Joined: 09/11/13	Perfect, Thanks Phil!