1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Removal of rub rail
Clyde in TS	#1  Posted on 04/23/14 - 9:19 AM
Member Posts: 25 Comments: 1 Joined: 04/16/14	any special trick to removing the rub rail on a 1985 15 foot Whaler so I can replace the wiring to the bow light? This site is a wonderful resource to a new owner of an old boat! I have not found another Whaler owner in the Greers Ferry Lake area. Thanks in advance cg
Phil T	#2  Posted on 04/23/14 - 9:31 AM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	If you have the two or three piece, just remove the black insert. You don't need to remove the receiver track. Tinned marine speaker wire is a recommended choice of wire.
Joe Kriz	#3  Posted on 04/23/14 - 10:41 AM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	See your other post here Clyde: http://www.whalercentral.com/forum/vi...d_id=19243
Clyde in TS	#4  Posted on 04/23/14 - 3:24 PM
Member Posts: 25 Comments: 1 Joined: 04/16/14	Your reply to my previous post was why I asked about the removal of the rub rail. Since my boat is a 1985 15 foot custom, I was checking to see if there was a best way to remove the rub rail and not damage it - rather than dive into it, screw it up and then have to buy a new rub rail. I thank you for your patience and assistance! cg cg