Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
Just started the conversion project and wanted to check-in with you guys to see if there were any parts that would be of interest (the top) before I destroyed it. It looks like I will need to get rid of the Bow locker doors and frame (teak and marine plywood). I will also need to get rid of the bow rail as I have not seen a Lo Pro with a Bow rail (I also have a bow rail off of a '63 Nauset if anyone is interested). There are two fiberglass doors on the top deck of the top (that I am removing) that need to go. I also have the bow light, cleat, and eye loop; but I would like to keep these, but don't see them on any Lo Pro pics from anyone else. Also, getting rid of Teak RPS, aluminum Z-legs, and rails. I know that the first question will be about pics and the next will be what my asking prices are. Again, I have just started this project and putting out feelers. Also, any advice on this conversion is greatly appreciated. The boat model is a mid 1970's outrage (not exactly sure of year). I will need the cushions/ rod holders that sit on the bow side of the console and cushion that sits on the cooler- so I am interested in trades for things that I will need. I am in Fairhope, Alabama. Thanks, Bricken
