1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Bait well question
Onoboater	#1  Posted on 01/27/13 - 9:40 AM
Member Posts: 6 Comments: 0 Joined: 12/31/12	My 1995 Outrage 21 hase a saltwater pump that fills the leaning post bait well and also powers the saltwater wash down. The bait well has no cutoff valve that I can see. Where the water sprays in the bait well it feels like inside threads. Can that be plugged so I can use the wash down?
contender250	#2  Posted on 01/27/13 - 1:11 PM
Member Posts: 363 Comments: 0 Joined: 10/09/11	There should be a valve after the pump to either run the bait tank or the wash down, If there is no valve this is were I would put one...take care..PS does not make sense to not have a change over valve unless this item was added after the factory by some one who did not know...
Onoboater	#3  Posted on 01/27/13 - 5:57 PM
Member Posts: 6 Comments: 0 Joined: 12/31/12	Thanks for the help. No valve that I can find. I will pay a pro to add one.
tmann45	#4  Posted on 01/28/13 - 8:19 AM
Member Posts: 196 Comments: 0 Joined: 02/18/07	There should be a nozzle to regulate the flow that screws into the threads that will shut off the flow when screwed in all the way.
Onoboater	#5  Posted on 01/28/13 - 9:59 AM
Member Posts: 6 Comments: 0 Joined: 12/31/12	Thanks I will look