1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Thru hull Bait Pump Installation
AquaVor	#1  Posted on 01/12/13 - 9:40 PM
Member Posts: 4 Comments: 0 Joined: 01/06/13	AquaVor Here, I just joined the site and we are eagerly awaiting the arrival of our 1985 27' FC from the east coast to So Cal Q: We need to install a 2-3 scoop Offshore bait tank and not real sure how to install the through hull fitting without compromising the foam between the layers of glass in bottom. Anyone done this before? We would rather not use a transome mounted pump if we can help it. Thank! Edited by Phil T on 01/13/13 - 5:38 AM
Phil T	#2  Posted on 01/13/13 - 5:41 AM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	Andrew- Welcome to Whaler Central. When you have a moment, please add your location to your profile so members can provide region specific advice to you. Edited by Phil T on 01/13/13 - 5:49 AM
AquaVor	#3  Posted on 01/13/13 - 8:49 AM
Member Posts: 4 Comments: 0 Joined: 01/06/13	Thanks Phil. I added our home port of Dana Point Ca btw...do you know about what this rig weighs with a pair of Yamaha HDPI 300 hp and hard top?
AquaVor	#4  Posted on 01/13/13 - 9:16 AM
Member Posts: 4 Comments: 0 Joined: 01/06/13	Thats REALLY good information Thank you! I was thinking that might be the case. Where can I find the specs on that? The boat is not here yet but should be by mid week
Guts	#5  Posted on 01/14/13 - 4:47 AM
Member Personal Page Posts: 612 Comments: 8 Joined: 11/21/08	I put it through Hull in my Montauk 17 for a transducer. It can be done if you do it right. The trick is going with a larger hole to the inside of the boat Hull. Then filling that area with Matt and glass then drill your whole for your thru Hull. There is one picture of my personal page. Edited by Guts on 01/14/13 - 4:47 AM Guts/AKA/Kim
zappaddles	#6  Posted on 01/14/13 - 10:52 AM
Member Posts: 478 Comments: 2 Joined: 06/03/10	When re-fitting the Nancy G, a 16' smirkless, I created an approx. 6"x8" sump area beside the engine end of end of the control and steering cable tunnel. This area accomodates a bilge pump and a thru-hull bait pump suitable for this sized boat. So far so good. If you can't play hurt....stay home.
Whalerbob	#7  Posted on 01/29/13 - 10:08 AM
Member Personal Page Posts: 311 Comments: 0 Joined: 12/07/06	I'd love to see some detailed pictures of the finished project if you don't mind. I know for sure the wood around my sump area is totally rotted from water intrusion around the screw holes that held the sump cap plate in place. There's probably no real reason for me to fix it but one of the things I've considered is enlarging that whole sump area to make more room for a bildge pump, through hull water pickup, and transducer. I'm pretty good with fiberglass work but I'm having trouble visualizing what the whole thing would look like or where /how the transducer wire would exit the fiberglass. I have an 1989 Montauk, does anyone know what the thickness is between the bottom of the sump area and the bottom of the hull? Is it solid glass, foam, or wood? Edited by Joe Kriz on 01/29/13 - 10:43 AM