Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
I'm a first time BW owner as of last week! The boat I got needs some work, and I've started in. I have a question about what is the ideal side console size and location.
My BW has a homemade aluminum framed side console in it. It stands 28" tall, is 32" wide, and from the side is 12" in width. One thing I like about it is that is has a slanted section for the steering wheel mount. However, as soon as I saw it on the boat, I thought the whole thing looked huge, especially as regards the height. Would 28" generally be considered high? I'm thinking 24" would look better.
I should mention, mine has a bench seat, so the seating is at the level of the gunwales. If it were higher seating, I could see having 28", but even at 6' tall, I found I was having to peer over the top of the console.
I've taken it out and taken the "skin" off - it was sheet metal that rattled while the boat was in gear. I'm going to skin it with something solid, maybe starboard. Any suggestions on what to cover it with?
Now that I have it out, I could make it a center console. I like having the left side space with the side console, but having a center console is appealing too. Any pros or cons on why at this point I should go with one or the other?
Holy smoke! That is certainly overbuilt and unnecessarily heavy. Also, Starboard is heavy for your purposes. If it were mine, but unfortunately it's not, I would build my console out of 3/8 marine plywood and varnish it. You could use 1"x1" material for the frame and put it together with titebond glue and screws. It would be plenty strong and much lighter than what you have. Enjoy your project and take the time to do it right and you'll be proud of it every time you use it.
I winter in Ft. Myers and summer in St. Joseph, Michigan. It’s now about 12 years since I’ve joined this group. I gave my 1972 whaler to my daughter and sold the 17’. Bought an O’Day 28 sailboat and sailed on Lake Michigan. Yesterday I bought a 2005 130 Sport.
wing15601 wrote:
Holy smoke! That is certainly overbuilt and unnecessarily heavy. Also, Starboard is heavy for your purposes. If it were mine, but unfortunately it's not, I would build my console out of 3/8 marine plywood and varnish it. You could use 1"x1" material for the frame and put it together with titebond glue and screws. It would be plenty strong and much lighter than what you have. Enjoy your project and take the time to do it right and you'll be proud of it every time you use it.
NEVER plywood.
John Fyke
Re-Fit or Reef It
1979 15' Sport with Super Sport conversion and 70hp mercury.
John, you should see what they've done with marine plywood. It can be immersed in water for months with no delamination. For a given dimension it's much stronger than lumber Take a look at some of the older Boston Whalers which have the deck cut where the wiring goes under the deck to the rear well. Many boats have survived years with that plywood edge exposed and have had no problems. Marine plywood can be purchased in many thicknesses with many different types of surface veneer . Heck, there are lots of antique wooden boats made of plywood. But it's not the kind you get at HomeDepot.
I winter in Ft. Myers and summer in St. Joseph, Michigan. It’s now about 12 years since I’ve joined this group. I gave my 1972 whaler to my daughter and sold the 17’. Bought an O’Day 28 sailboat and sailed on Lake Michigan. Yesterday I bought a 2005 130 Sport.
wing15601 wrote:
Holy smoke! That is certainly overbuilt and unnecessarily heavy. Also, Starboard is heavy for your purposes. If it were mine, but unfortunately it's not, I would build my console out of 3/8 marine plywood and varnish it. You could use 1"x1" material for the frame and put it together with titebond glue and screws. It would be plenty strong and much lighter than what you have. Enjoy your project and take the time to do it right and you'll be proud of it every time you use it.
Thanks to everyone who replied. It's made of aluminum, so not too heavy, though when skinned with starboard or whatever, it's going to weigh a whole lot more. I really want to re-use what I have, just because I'm into re-use and I don't mind the setup.
My idea was to cut out 4" from each leg to make it 24" in height. I could see even cutting out 6" to make it 22" high. I researched and saw that the usual BW center console is 24" tall, so 24" I suppose is the standard.
As for the width, 32" seems plenty wide. There is nothing functional to do with all that space. I have a GPS that mounts on the top flat portion, but the rest of the space is unused. All that slanted space where the steering wheel mounts is unused. Does 32" seem wide? I could cut out those sections say 4" each and make it 28" wide. With the wheel positioned far left (like you see in the picture, it's pretty far left), I can sit near-center when out on my own and reach over for the controls.
So I'm thinking 22" tall and 28" wide. Same 12" depth. Does that sound practical?
