1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1995 13' Dauntless - Wiring of Navigation Light Switch
Shiftchange	#1  Posted on 08/28/12 - 10:09 AM
Member Posts: 5 Comments: 0 Joined: 08/28/12	I accidentally removed a couple wires from my navigation switch and need to know which wires go to which terminal. I have a 1995 13' dauntless
Joe Kriz	#2  Posted on 08/28/12 - 10:17 AM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11434 Comments: 452 Joined: 03/18/05	See this article: http://www.whalercentral.com/articles...icle_id=51 Yours may be slightly different so you may have to experiment.
Shiftchange	#3  Posted on 08/28/12 - 10:27 AM
Member Posts: 5 Comments: 0 Joined: 08/28/12	it doesn't look anything like your picture. The center position is off, up is navigation, down is anchor, I think it has 7 spades for connections, the siwtch is made of plastic
Joe Kriz	#4  Posted on 08/28/12 - 10:29 AM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11434 Comments: 452 Joined: 03/18/05	Same principle. Like I said, you may have to experiment. You only pulled 2 wires off you said in your first post. Do you have any photos of this switch? It doesn't sound original to me.
Shiftchange	#5  Posted on 08/28/12 - 10:32 AM
Member Posts: 5 Comments: 0 Joined: 08/28/12	I think I found it... (I hope this link works for you) http://i61.photobucket.com/albums/h51...Wiring.jpg Edited by Joe Kriz on 08/29/12 - 1:01 PM
Shiftchange	#6  Posted on 08/28/12 - 10:41 AM
Member Posts: 5 Comments: 0 Joined: 08/28/12	It should be original it's built in to the center console and I did buy a replacment switch so they looked it up and found it. I think I'll be OK with the schematic I found it looks right Thanks Joe
Joe Kriz	#7  Posted on 08/28/12 - 10:46 AM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11434 Comments: 452 Joined: 03/18/05	Great. Let us know if you get it working properly. I haven't seen that type of switch used but then again, I haven't looked that closely at the Dauntless 13'.
dprice	#8  Posted on 08/29/12 - 6:43 AM
Member Personal Page Posts: 43 Comments: 0 Joined: 01/02/08	Joe; My 2000 Montauk has the same switch Shiftchange is describing, workingthrough the same issue. Don Price
Shiftchange	#9  Posted on 08/30/12 - 3:58 AM
Member Posts: 5 Comments: 0 Joined: 08/28/12	I fixed the issue!! I have pictures and the wiring diagram, I'd like to share it but I don't know see a way to attach a file to this post. If you would like it let me know and I'll send it on
Buoy	#10  Posted on 06/24/16 - 4:17 PM
Member Posts: 40 Comments: 0 Joined: 01/01/08	Shiftchange wrote: I fixed the issue!! :) I have pictures and the wiring diagram, I'd like to share it but I don't know see a way to attach a file to this post. If you would like it let me know and I'll send it on Hi all. I have a 1995 13 Dauntless and am also looking for the wiring diagram. Does anyone have a copy to share? Thanks. 2006 Conquest 235
telrush	#11  Posted on 07/07/18 - 12:57 PM
Member Posts: 6 Comments: 0 Joined: 10/04/14	Hi Shiftchange Can you send me your wiring diagram? I would be happy to pm you my email address if you would be so kind. Thanks Tony
matt3034	#12  Posted on 10/08/21 - 4:15 AM
Member Posts: 8 Comments: 0 Joined: 10/03/21	I have a 1995 17' Dauntlass bow ride my nav. lights and bilge pump are not working and I do not see a fuse block under the dash. can any one tell me where it is located?