1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

What a weekend! - Console Screen
Mark Finkenstaedt	#1  Posted on 06/27/11 - 12:44 PM
Member Personal Page Posts: 195 Comments: 4 Joined: 08/20/08	Not only did my iPhone 4 reach the bottom of the Chesapeake but a low branch in the driveway cracked my console windscreen. Any ideas for a suitable replacement? I see http://www.updplastics.com/boston%20w...hields.htm - any experience with this product? My screen has a nice black effect at the bottom (personal page photos -last one) I could live with it for now but not sure what the wind will do to it - probably vibrate like crazy. Damn .... B-O-A-T Edited by Mark Finkenstaedt on 06/27/11 - 12:45 PM 2001 18' Dauntless - 150HP 2010 E-TEC
kamie	#2  Posted on 06/27/11 - 2:54 PM
Member Personal Page Project Albums Posts: 2975 Comments: 3 Joined: 11/04/05	Call Sue and see what they have. She might have the correct stock number
Mark Finkenstaedt	#3  Posted on 06/27/11 - 8:38 PM
Member Personal Page Posts: 195 Comments: 4 Joined: 08/20/08	Thanks Kamie 2001 18' Dauntless - 150HP 2010 E-TEC
A Little Madness	#4  Posted on 06/28/11 - 8:33 AM
Member Personal Page Posts: 96 Comments: 0 Joined: 04/01/07	We used UPD a few years ago on our Classic 17 Montauk and very satisfied w/price, hardware, etc. I'm sure they'll have exactly what you need. Good Luck! Chris & Dale Schnell "A Little Madness" - 1989 Montauk 17'
CES	#5  Posted on 06/28/11 - 8:50 AM
Member Personal Page Photo Albums Project Albums Posts: 2681 Comments: 7 Joined: 04/27/07	A Little Madness wrote: We used UPD a few years ago on our Classic 17 Montauk and very satisfied w/price, hardware, etc. I'm sure they'll have exactly what you need. Good Luck! UPD is a good company...out of Fort Lauderdale Florida I believe. Cliff 1966 13' Sport with a 1993 40hp Yamaha 2 Smoker
John Fyke	#6  Posted on 06/28/11 - 2:22 PM
Member Personal Page Posts: 1307 Comments: 0 Joined: 09/06/06	http://www.updplastics.com/about.htm John Fyke Re-Fit or Reef It 1979 15' Sport with Super Sport conversion and 70hp mercury.
Mark Finkenstaedt	#7  Posted on 06/28/11 - 7:45 PM
Member Personal Page Posts: 195 Comments: 4 Joined: 08/20/08	Thank you everyone. I'll let you know what I find/experience. I'll tape it for the 4th weekend and see if I can find a way out onto the busy Potomac for the DC fireworks. 2001 18' Dauntless - 150HP 2010 E-TEC
Fishmore	#8  Posted on 06/28/11 - 10:51 PM
Member Personal Page Posts: 270 Comments: 0 Joined: 11/20/07	Tap plastics carry's a special glue for acrylics. It is very strong and dries clear. If the crack is not too bad maybe you can repair it.
TacoHunter	#9  Posted on 06/29/11 - 12:13 AM
Member Posts: 42 Comments: 0 Joined: 05/22/11	Mark Finkenstaedt wrote: Damn .... B-O-A-T-T There fixed it for you. I'm noticing it's been more like another two-thousand. - Mike 1986 18' Outrage - 90 HP Honda 4 Stroke