1973 19'4" Outrage Rehab
|
Bake |
Posted on 01/14/10 - 4:19 AM
|
Member
Personal Page
Project Albums
Posts: 902
Comments:
8
Joined: 01/30/06
|
very nice. The extra wood on the console is going to look sharp when you rig it out.
|
|
|
|
sraab928 |
Posted on 01/14/10 - 4:36 PM
|
Member
Project Albums
Posts: 1282
Comments:
13
Joined: 12/27/05
|
Thanks Bake - I wanted to do something a bit different - I hope it works out.
Scott
1974 21' Revenge w Mercury 200 ProXS V8 |
|
|
|
themclos |
Posted on 01/14/10 - 4:55 PM
|
Member
Personal Page
Project Albums
Posts: 81
Comments:
3
Joined: 12/11/05
|
Scott,
Beautiful work. Looking through your project album inspires me as I work through refinishing the teak on my boat (which is child's play comparatively).
Any chance we will you see you and the Outrage this summer at the NY Rendezvous?
Dan
Dan
1986 22 Outrage Cuddy, 2002 225HP Optimax |
|
|
|
sraab928 |
Posted on 01/14/10 - 5:37 PM
|
Member
Project Albums
Posts: 1282
Comments:
13
Joined: 12/27/05
|
There is a chance - first the boat has to be done - which should be close - As long as she is powered I would be ok - The other issue is the date - its smack dab in the middle of graduation season. im hoping there is no date conflict.
Scott
1974 21' Revenge w Mercury 200 ProXS V8 |
|
|
|
RLwhaler |
Posted on 01/15/10 - 8:45 AM
|
Member
Posts: 53
Comments:
4
Joined: 09/21/05
|
Scott,Your 19 Outrage is going to be drop dead gorgeous! Loved what you did to the console.
Richard
|
|
|
|
sraab928 |
Posted on 01/16/10 - 4:21 AM
|
Member
Project Albums
Posts: 1282
Comments:
13
Joined: 12/27/05
|
Thanks Richard.... I am really looking forward to splashing her this year... been a long time comin.
Scott
1974 21' Revenge w Mercury 200 ProXS V8 |
|
|
|
ritzyrags |
Posted on 01/16/10 - 8:24 AM
|
Member
Project Albums
Posts: 1003
Comments:
36
Joined: 06/18/08
|
Got to love those louvered doors Scott.
Looking much better.
Dont lie
Dont Cheat
And dont give up.. |
|
|
|
sraab928 |
Posted on 01/21/10 - 4:53 PM
|
Member
Project Albums
Posts: 1282
Comments:
13
Joined: 12/27/05
|
Well boys - she saw the light of day for the first time in a year..... She did not see daylight all of 2009..... What a glorious day it was.... Check out my project page for updated photos... She is coming home next week - Then its time to install the new fuel system, all new wiring, new rubrail, and mounting the Suzuki.
here is a teaser..
[img]http://www.whalercentral.com/images/photoalbum_3/useralbum_29/outrage0001_2.jpg[/img]
[img]http://www.whalercentral.com/images/photoalbum_3/useralbum_29/outrage0001_6.jpg[/img]
Edited by sraab928 on 01/21/10 - 4:55 PM
Scott
1974 21' Revenge w Mercury 200 ProXS V8 |
|
|
|
Blue_Northern |
Posted on 01/22/10 - 6:56 AM
|
Member
Personal Page
Project Albums
Posts: 532
Comments:
5
Joined: 09/04/07
|
WOW!!! I am so envious of your progress. I need to get off my butt and finish mine. Looks great Scott!
Rob
1973 Outrage/Lo-Pro Conversion |
|
|
|
RLwhaler |
Posted on 01/22/10 - 12:47 PM
|
Member
Posts: 53
Comments:
4
Joined: 09/21/05
|
Scott,those doors looks GREAT! would you kindly recommend me the fella that made them?
Thanks,
Richard
|
|
|
|
HarleyFXDL |
Posted on 01/22/10 - 1:51 PM
|
Member
Personal Page
Project Albums
Posts: 917
Comments:
30
Joined: 07/24/07
|
I think you need to open a new business Scott. You seem to have a knack for this stuff. Whaler restoration could be in your future, awesome job Scott.
Kevin
1988 11' Super Sport, 1987 Johnson 15hp.
If you think education is expensive, try ignorance
"Vegetarian - old Indian word for bad fisherman." |
|
|
|
sraab928 |
Posted on 01/22/10 - 5:30 PM
|
Member
Project Albums
Posts: 1282
Comments:
13
Joined: 12/27/05
|
Thanks Guys. The doors were made by Classic Restoration.
http://www.vintagewatercraft.com/craft.com/
Scott
1974 21' Revenge w Mercury 200 ProXS V8 |
|
|
|
sraab928 |
Posted on 05/18/10 - 4:49 PM
|
Member
Project Albums
Posts: 1282
Comments:
13
Joined: 12/27/05
|
Been making some progress - Motor is mounted, fuel tank and floor installed, gauges, controls and steering are mounted on console. Should have console mounted this week. Getting closer every day. Check out the project album for a few updates.
Scott
1974 21' Revenge w Mercury 200 ProXS V8 |
|
|
|
sraab928 |
Posted on 05/24/10 - 3:34 AM
|
Member
Project Albums
Posts: 1282
Comments:
13
Joined: 12/27/05
|
Added a few more pictures today - be sure to check out the picture of the hydraulic steering issues.
Scott
1974 21' Revenge w Mercury 200 ProXS V8 |
|
|
|
Derwd24 |
Posted on 05/24/10 - 9:34 AM
|
Member
Posts: 1607
Comments:
9
Joined: 05/09/07
|
Looks fantastic Scott! What are your impressions of how the non-skid came out compared to how it looks from the factory?
Dave - 1983 Outrage 22 |
|
|
|
sraab928 |
Posted on 05/24/10 - 10:16 AM
|
Member
Project Albums
Posts: 1282
Comments:
13
Joined: 12/27/05
|
Thanks Dave, My initial impression was dissapointment - as I really wanted it to be factory. Now I am used to it and dont even look twice at it. For whatever thats worth.
Scott
1974 21' Revenge w Mercury 200 ProXS V8 |
|
|
|
Finnegan |
Posted on 05/24/10 - 2:34 PM
|
Member
Posts: 1926
Comments:
16
Joined: 05/02/08
|
Scott - Baystar hydraulic does not work well with jackplates. You are going to have to use a Side Mount hydraulic cylinder.
Boston Whaler furnished side mount cylinders with all of the Whaler Drive boats for the same reason - front clearance when tilted.
Edited by Joe Kriz on 07/29/16 - 6:49 PM |
|
|
|
Blue_Northern |
Posted on 05/24/10 - 3:21 PM
|
Member
Personal Page
Project Albums
Posts: 532
Comments:
5
Joined: 09/04/07
|
Scott - DO NOT get the side mount unit. I have more friends who trip or kick those getting out of the boat than you can imagine. Here is the issue with having the center mount cylinder on a jackplate. When the plate is full down and the motor is tilted full up the grease zerks will hit the transom and can break off. Solution - don't do that! I have had the center cylinder on my bob's plate for years with no problems. You can also mount your motor a few holes high and it helps with this as well. I would check the width of the cylinder against the recessed transom on the 19 before I bought it to make sure it fits inside the opening. Shouldn't be an issue but best to measure twice cut once right.
Rob
1973 Outrage/Lo-Pro Conversion |
|
|
|
sraab928 |
Posted on 05/25/10 - 3:24 AM
|
Member
Project Albums
Posts: 1282
Comments:
13
Joined: 12/27/05
|
Thanks guys - at this point I have invested a ton in this boat and the thought of changing the steering or jackplate would drive me nuts. My plan for now is just to raise the jackplate before tilting the motor. I worry there will be a day I forget to do that but we shall see.
Scott
1974 21' Revenge w Mercury 200 ProXS V8 |
|
|
|
sraab928 |
Posted on 05/26/10 - 2:10 PM
|
Member
Project Albums
Posts: 1282
Comments:
13
Joined: 12/27/05
|
Getting closer every day. Heading off to electrical guy for new wiring. Here is how she sits as of right now... Click on the pic for a better view.
[img]http://www.whalercentral.com/images/photoalbum_3/useralbum_29/whalercentral052610.jpg[/img]
Edited by sraab928 on 05/26/10 - 2:11 PM
Scott
1974 21' Revenge w Mercury 200 ProXS V8 |
|
|