1995 13' Dauntless - Wiring of Navigation Light Switch
|
Shiftchange |
Posted on 08/28/12 - 10:09 AM
|
Member
Posts: 5
Comments:
0
Joined: 08/28/12
|
I accidentally removed a couple wires from my navigation switch and need to know which wires go to which terminal. I have a 1995 13' dauntless
|
|
|
|
Joe Kriz |
Posted on 08/28/12 - 10:17 AM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11445
Comments:
452
Joined: 03/18/05
|
See this article:
http://www.whalercentral.com/articles...icle_id=51
Yours may be slightly different so you may have to experiment.
|
|
|
|
Shiftchange |
Posted on 08/28/12 - 10:27 AM
|
Member
Posts: 5
Comments:
0
Joined: 08/28/12
|
it doesn't look anything like your picture. The center position is off, up is navigation, down is anchor, I think it has 7 spades for connections, the siwtch is made of plastic
|
|
|
|
Joe Kriz |
Posted on 08/28/12 - 10:29 AM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11445
Comments:
452
Joined: 03/18/05
|
Same principle.
Like I said, you may have to experiment.
You only pulled 2 wires off you said in your first post.
Do you have any photos of this switch?
It doesn't sound original to me.
|
|
|
|
Shiftchange |
Posted on 08/28/12 - 10:32 AM
|
Member
Posts: 5
Comments:
0
Joined: 08/28/12
|
I think I found it... (I hope this link works for you)
http://i61.photobucket.com/albums/h51...Wiring.jpg
Edited by Joe Kriz on 08/29/12 - 1:01 PM |
|
|
|
Shiftchange |
Posted on 08/28/12 - 10:41 AM
|
Member
Posts: 5
Comments:
0
Joined: 08/28/12
|
It should be original it's built in to the center console and I did buy a replacment switch so they looked it up and found it. I think I'll be OK with the schematic I found it looks right Thanks Joe
|
|
|
|
Joe Kriz |
Posted on 08/28/12 - 10:46 AM
|
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums
Posts: 11445
Comments:
452
Joined: 03/18/05
|
Great. Let us know if you get it working properly.
I haven't seen that type of switch used but then again, I haven't looked that closely at the Dauntless 13'.
|
|
|
|
dprice |
Posted on 08/29/12 - 6:43 AM
|
Member
Personal Page
Posts: 43
Comments:
0
Joined: 01/02/08
|
Joe;
My 2000 Montauk has the same switch Shiftchange is describing, workingthrough the same issue.
Don Price |
|
|
|
Shiftchange |
Posted on 08/30/12 - 3:58 AM
|
Member
Posts: 5
Comments:
0
Joined: 08/28/12
|
I fixed the issue!!
I have pictures and the wiring diagram, I'd like to share it but I don't know see a way to attach a file to this post. If you would like it let me know and I'll send it on
|
|
|
|
Buoy |
Posted on 06/24/16 - 4:17 PM
|
Member
Posts: 40
Comments:
0
Joined: 01/01/08
|
Shiftchange wrote:
I fixed the issue!! :)
I have pictures and the wiring diagram, I'd like to share it but I don't know see a way to attach a file to this post. If you would like it let me know and I'll send it on
Hi all. I have a 1995 13 Dauntless and am also looking for the wiring diagram. Does anyone have a copy to share?
Thanks.
2006 Conquest 235 |
|
|
|
telrush |
Posted on 07/07/18 - 12:57 PM
|
Member
Posts: 6
Comments:
0
Joined: 10/04/14
|
Hi Shiftchange
Can you send me your wiring diagram? I would be happy to pm you my email address if you would be so kind.
Thanks
Tony
|
|
|
|
matt3034 |
Posted on 10/08/21 - 4:15 AM
|
Member
Posts: 8
Comments:
0
Joined: 10/03/21
|
I have a 1995 17' Dauntlass bow ride my nav. lights and bilge pump are not working
and I do not see a fuse block under the dash. can any one tell me where it is located?
|
|
|