1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Prop Recommendation for Montauk Repower
simontonmc	#1  Posted on 10/10/11 - 7:01 PM
Member Personal Page Posts: 25 Comments: 0 Joined: 08/15/11	My 1979 17' montauk is in the process of getting a new 90 E-Tec hung on the transom. I'm not sure what brand, size, pitch prop is currently on the boat. Can I get a recommendation from you guys? Boat will primarily be used for skiing, fishing, general runabout in brackish water. Thanks.
Phil T	#2  Posted on 10/11/11 - 5:18 AM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	Here is some good comparison information on two propellers and their performance. http://continuouswave.com/ubb/Forum4/...04278.html 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
Tom W Clark	#3  Posted on 10/11/11 - 8:18 AM
Member Personal Page Posts: 4280 Comments: 7 Joined: 09/30/05	The Evinrude E-TEC 90 on a classic Montauk usually makes good use of the 13-1/4" x 15" Stiletto Advantage 4.25 though some guys are running the 13-1/4" x 17" Stiletto Advantage 4.25. The most important thing to keep in mind is to be sure the dealer mounts the motor high on the transom. DO NOT allow him/her to bolt it on all the way down or even just one hole up. It should be two or three holes up. Again and again and again, we have seed dealers/mechanics insist on mounting a new outboard all the way down in the transom like they did 30 years ago. This is wrong. The boat will not perform as well as it should. Do not allow them to do this to your new motor.