The first thing you'll need is a Fender. I used Taylor Made 6.5" diameter and 22" long ones.

For each Fender you'll require a Bungee Cord. I used a 5' length. Depending on your docking needs, the length may vary. Remember, you'll want to hang the Fender in both the vertical and horizontal position, depending upon the docking situation.

At each end of the Bungee Cord you'll need one stainless steel Hook End. These can be purchased at most Marine Stores. You want to size the Hook End so that it cannot slip through the Fender hole. Also, when purchasing the Hook Ends, try to get a loop size that matches the rail diameter. THIS IS IMPORTANT!

You'll need a 1" wide nylon strap with a male and female buckle end and two strap guides.

For all of the above, the color of the components is your choice. I chose the colors that best suited my color preferences.

Click image for maximum view
Date: 09/18/13 - 7:07 AM
Added by: Ron Mazcko
Dimensions: 960 x 720 pixels
Filesize: 174.08Kb
Comments: 0
Number of views: 1624