Posted by Key-z on 10/11/06 - 5:22 PM
#1
Does anyone know how to remove two part foam from the gask tank cavity.I've removed the thick wall but still have a thin coat on the wall of the cavity. Any suggestions would be appreciated.
Key-z:)
Posted by fl22outrage on 10/12/06 - 1:56 PM
#2
I used a plastic scraper from Home Depot, the cheap $.99 one. Worked good and did not hurt the gelcoat. I never got it all off 100%, but the new foam took care of that. Once the tank is foamed back in you will forget about the old foam you could not get off.
Posted by Key-z on 10/12/06 - 3:20 PM
#3
Thanks for the imformation. My concern was that with the residue still adhered to the walls, I was afriad the foam would not take. I'll try it.:p:D
Thanks again,
Key-z