Posted by PK on 07/02/09 - 12:10 PM
#1
I recntly received a new interior 13 supersport interior from Nautical lumber, Its absolutely georgeous! Now i realize why i should not have taken the old one to the dump, I dont have a template for drilling and mounting the new interior.
I also did a tremendous job of filling the old holes in the interior bfore shooting it during the redo!
Does anyone have teplates or closeup pics that I could work from for remounting and finishing the project Thanks
Posted by kamie on 07/02/09 - 2:09 PM
#2
too bad you took the old one to the dump. I would have paid to have you ship it to my house. Mount the new interior so the rear of the thwart seat it 42-43 inches from the inside of the stern. that should be about right.
Posted by Binkie on 07/02/09 - 8:38 PM
#3
Kamie, are you going to use a stock side console in your 13 footer?
Posted by kamie on 07/03/09 - 5:54 AM
#4
rich, probably not. the current plan on paper is to do a dual console version with jump seats in front of the consoles. the rear seat will have a back, similar to the supersport. Not sure if i will try the supersport storage or only do storage under the two front seats.