---

Does anyone have any pictures of a set up that would work on this boat? Can't do a troller as it has a wrap around rail on the bow but would like to do a kicker if possible.

Thanks in advance

---

Look in the "Vendors Web Links" on the left sidebar under Motor Brackets.

I would put a solid mount on the back, not one of those knuckle and back breaking adjustable brackets.

I would also not cut the rub rail to mount it directly on the transom.

There are many ways to also make your own fixed bracket.
I have attached one below that uses white starboard. You could use black starboard etc...

---

Whaler said this

"Unfortunately, the 150 Sport does not have the reinforcement on the transom in order to mount an auxiliary motor bracket...sorry.
Below is a link to the reinforcement diagram for the 2007 150 Sport...
http://whalerparts.com/Diagrams/2007/Wood/1689779.pdf"

and this "I suppose something could be custom fabricated as long as it is properly thru-bolted on the transom where the reinforcement is molded in between the inner and outer hull.
There is no bracket (that I know of) that will mount in this area and angle out towards the port side of the main engine to allow clearance for steering."

Do you know for sure that a bracket would work like you have pictured?

Thanks

---

I have not looked at the wood locating diagrams for a 2007 150 Sport as I do not own one.

Take precautions. Maybe others here can have suggestions.