Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: pilot seat
Posted by jvigliotti on 04/20/08 - 7:36 AM
#1
thinking of raising my pilot seat any ideas from forum.thank you j.v.
Posted by ioptfm on 04/20/08 - 5:40 PM
#2
What model Whaler do you have, what type seats does it have now? Give us a little more info :D
Posted by oliver1234 on 04/20/08 - 7:39 PM
#3
if its an rps, i saw a realy nice set of blocks on this site somewhere that were made for rising up the rps, they were the same material and shape of the z legs.
Posted by Joe Kriz on 04/20/08 - 8:03 PM
#4
There are some fancy ones around for the bottom of the RPS legs.
I used 2 inch thick teak and cut it around the shape of the bottom of the legs.
[img]http://www.whalercentral.com/images/rps_risers/riser1.jpg[/img]
[img]http://www.whalercentral.com/images/rps_risers/riser2.jpg[/img]
Edited by Joe Kriz on 04/20/08 - 8:15 PM
Posted by jvigliotti on 04/21/08 - 5:22 PM
#5
ioptfm wrote:
What model Whaler do you have, what type seats does it have now? Give us a little more info :D
i have a1987 montauk 17 rps pilot seat with the z bottom...thanks jvigliotti
Posted by jvigliotti on 04/21/08 - 5:26 PM
#6
Joe Kriz wrote:
There are some fancy ones around for the bottom of the RPS legs.
I used 2 inch thick teak and cut it around the shape of the bottom of the legs.
[img]http://www.whalercentral.com/images/rps_risers/riser1.jpg[/img]
[img]http://www.whalercentral.com/images/rps_risers/riser2.jpg[/img]
thank you joe great idea jvigliotti for my 87 montauk that i bgt.new happy guy thanks again
Posted by Paul Graham on 04/22/08 - 6:00 PM
#7
I have a pair of riser blocks made to fit under a RPS, they appear to be made of white starboard and I think they are 2" thick I'll get pictures and send them this weekend if you like