Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: whaler decal's measurement
Posted by ironjime9 on 03/02/08 - 12:04 PM
#1
Replacing the stern decal's on my 22 fresh painted hull with no reference to really go by, somebody have a correct measurement. thanks.
Posted by scrimshaw on 03/03/08 - 4:29 AM
#2
Year and model would help,so could Sue at Twin Cities Marine.
Posted by Bob Younger on 03/03/08 - 4:40 AM
#3
Try Magic Brush, I got mine from them (14" for 1963 Eastport). They are one of our sponsors (see upper right) and will be able to help you.
Posted by Derwd24 on 03/03/08 - 8:30 AM
#4
Are you asking about the decals themselves or where they should be located on the side of the boat? If it's the latter, I've seen some located up high closer to the gunwale, but mine are lower, closer to the middle. I'm not sure if BW had different locations for different years/models? Also noticed on some aftermarket port side decals, the Boston is before the harpoon and on some it's after, so it's probably best to stick with original decals...
Edited by Derwd24 on 03/03/08 - 8:51 AM
Posted by DelawareDan on 03/04/08 - 4:32 AM
#5
[IMG]http://i204.photobucket.com/albums/bb77/DelawareDan/whaler%20project/DSCN0361.jpg[/IMG]
[IMG]http://i204.photobucket.com/albums/bb77/DelawareDan/whaler%20project/DSCN0359.jpg[/IMG]
I don't have your model, but I thought I'd post this here "for future generations." I believe my stickers were original to my
'69 Montauk-sized Whaler. It was the original gelcoat, and the sticker certainly looks nearly 40 years old. I took the pictures so that when I'm done with the hull, I can place the stickers where they were.
Posted by ironjime9 on 03/04/08 - 4:36 PM
#6
Delaware Dan Thanks very much. that will help a great deal in rebuilding my 1979 22' outrage. Jim
Posted by Yiger on 03/04/08 - 7:33 PM
#7
Has anyone found a place to get the new 'drip mold' logos, rather than the old sticker style? Are these even obtainable?
Posted by bdingman on 03/05/08 - 8:53 AM
#8
When I refinished the hull of my 1984 Montauk, I bought all new decals from MagicBrush. I sent Janis Johnson at Magic Brush the HIN # and she was able to determine the exact size and all the decals that were on my original boat. She also made new Hull registration numbers that matched the BW block letter style and color.
As far as where to locate the BW decals, I contacted Chuck Bennett at Boston Whaler, 386-428-0057 cbennett@whaler.com and he gave me the location dimensions for all the decals I needed.
Posted by Jeff on 03/05/08 - 6:27 PM
#9
I know I have measurements for the placement of the logos on 22' Outrage Hull. I think I also have some red and black whaler logos left over from my old 22. Let me look at my office tomorrow.
Edited by Jeff on 03/05/08 - 6:28 PM