Posted by Rmaurer on 06/21/24 - 8:08 AM
#1
I have a 2011 220 outage . I want to replace the worn out back cushion above the cooler and the cushion on the bow behind the anchor. Does anyone know how to remove these cushions.
Posted by Phil T on 06/21/24 - 5:25 PM
#2
Boston Whaler cushions are attached via 3 methods:
A- via hidden button snaps on the face of the mounting surface and the back of the cushion.
B- via a metal clip mounted to the hard surface that has a mating partner on the cushion.
C- A machine screw throught the mounting surface into a threaded insert in the back of the cushion.
For the cooler backrest, check inside the console, forward wall, for a hex heads of the machine screws.
For the bow cushion, peel back the edges and look for button snap. Use a flat headed screwdriver and insert in the middle and twist gently.
Posted by Rmaurer on 06/24/24 - 8:06 AM
#3
Thanks for info. There is no hex bolt on the forward console bulk head , so it must be clips or snaps .
On the bow cushion I will try the screw driver method .
Thanks again.