Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: 1969 montauk 17

Posted by Sferace on 06/04/24 - 11:46 AM
#1

I have some screw holes chewed out from my seat , 2 holes no screws in them, and about 4 holes where i had cleats previously. my boat seemed a bit heavy the other day when i lifted trailer on to my tow hitch. I didnt cover it over the new england winter i think it may have taken on rain, ice, snow water into hull. what harm in using my old whaler this season if its waterlogged? id liek to restore it but i am not skilled to rip out the floor and remove the foam etc. might just let it rip this summer

Posted by Joe Kriz on 06/04/24 - 5:56 PM
#2

You must have a different model as the Montauk was not made until 1973.
https://www.whalercentral.com/userpho...lbum_id=14
https://www.whalercentral.com/viewpag...age_id=172

Before anyone can help you, please let us know what model you have and possibly the Stencil Number on the Hull to verify the year.
https://www.whalercentral.com/userpho...allery.php

It is possible that you have a "Custom Model".
https://www.whalercentral.com/forum/v...post_84902
Again, please let us know what you have.

Posted by Sferace on 06/05/24 - 8:37 AM
#3

thank you Joe I will get the numbers on the plate on the transom.
regards,
Shea

Posted by Sferace on 06/05/24 - 11:18 AM
#4

looks to be a 1969 sakonnet from the info you sent me to review i appreciate your site wish i ifound this sooner going to get the plate numbers once i get it back from danversport there doing my annual spring tune up

Posted by Joe Kriz on 07/08/24 - 2:41 PM
#5

Upload a photo in your post so we all can see what you have.

Posted by Sferace on 07/09/24 - 7:10 AM
#6

How do i upload photos. can you set me up so i can create personal page, album

Posted by Sferace on 07/09/24 - 7:11 AM
#7

pic here

Posted by Sferace on 07/09/24 - 7:13 AM
#8

trying again file size is reduced to 2kb

Posted by Sferace on 07/09/24 - 7:15 AM
#9

ok hopefully this one takes