---

Hi,

Any ideas were to get the capacity plate ??? all I could get was a printable version e-mailed to me by a Whaler Dealership here on Long Island.

Thanks,

MW (Matt)

---

No Ideas but please send the file to Whaler Central for the download page.

---

Here are a couple of threads on this topic from CW

http://continuouswave.com/ubb/Forum3/...06657.html



http://continuouswave.com/ubb/Forum1/...10975.html


I wish I could get the art work for a 13 sport


Doug

---

Matt,

Doug's links will provide much info. And as he said please send the electronic version you received from the dealer to Jeff Rohlfing - our resident graphics expert. As far as I know it's doubtful you'll find an actual replacement plate.

I think the drill is basically - Take the image in electronic form to a local sign maker and have them make either a plate or a stick-on decal. A 1974 Sourpuss I had was only equiped with a sticker - no metal plate. I think I read that folks were getting theirs reproduced for around $20.

Here is a link to our OEM parts page:http://www.whalercentral.com/photogal...p?album=33. You'll find a few examples of the plates that Jeff has produced.

You can send Jeff a private message by clicking this link: http://www.whalercentral.com/messages...sg_send=35.

Let us know how things work out and good luck.
Mike

(I added a www in one of the url's. Joe)

---

MW,

Let me know if I can be of help. If you get me a straight on shot of the plate or if you can find one and send it to me I can create the files needed for a shop to create one for you.

---

Jeff,

How about the files for a 1976 13' sport?

Here is a link to a photo that was referenced in one of the above CW threads. Is that what you need?

http://photobucket.com/albums/v402/jt...=cp002.jpg

---

Of course now I can't find it, or the copy I made (both of them). I remember that I contacted "BW" about it, and I got a reply from a BW dealer here on Long Island called "Surfside3". I contacted "Surfside3", and asked about the capacity plate pic/link, they asked me the person's name that sent me the pic/link, of course I could'nt provide that, and there are a few "surfside3" boat dealers on Long Island (all affiliated). I tried the same route again by contacting "BW" (parts), lets hope that the results are the same as the 1st time. If they are, I will post the pic/link. There has GOT to be somebody out there with a '76 -15' sport with a plate still intact, I'm sure a "Trophy Shop" can copy it onto a plate w/ no prob.



Matt

---

just e-mail me,and I'll send it to anyone that needs it !

---

MW,

Please send us a copy so we can add it to the download section.

Thanks

---

Removed Broken link and added the photo Matt sent in to us. Thanks Matt.

Click the link below to download this image -
http://www.whalercentral.com/download...load_id=51

---

MW,
Your link is not set up for public viewing. Only you can see it.

---

Jeff,
I sent you the image Matt sent me of the 15' Capacity plate.
Have you had a chance to look at it yet and/or make a full size drawing of it like you did with the others?