Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: Installing Min Kota Ultera Trolling Motor on 1983 Outrage 18
Posted by Expensive_Sunburn on 03/12/20 - 5:59 PM
#1
Ladies and Gentlemen:
I will soon purchase and install a Min Kota 24V 60" Ulterra Trolling Motor on bow of my 1983 Outrage 18. Twin batteries and charger will be installed in forward locker. I will need to build a mounting plate to maintain clearance with bow rail and stowed flying top and forward shelter while minimizing exposure of stowed trolling motor surfaces beyond rub rails.
I am seeking any previous experience and advice while planning my next upgrade.
Thank you in advance for all input.
Posted by reelescape1 on 03/13/20 - 3:50 AM
#2
I thought this was a nice option that may help.
https://www.shuttleslide.com/
Edited by Phil T on 03/13/20 - 5:25 AM
Posted by Expensive_Sunburn on 03/13/20 - 10:07 AM
#3
Thank you very much for sharing the Shuttle Slide. This opens up new clearance options that I hadn't considered with a fixed mount.
Posted by Phil T on 03/13/20 - 5:01 PM
#4
There are several threads on modifying the bow rail to add a hinge to deploy the motor. Use the search feature.
Posted by Expensive_Sunburn on 03/18/20 - 2:43 PM
#5
Thank you Phil.
Posted by todd12 on 04/07/20 - 7:24 AM
#6
Tommy,
I have emailed you some pictures of my 18’ outrage bow mounted trolling motor.